ElecGlbPrm_IntegrationManual
Integration Manual
For
ElecGlbPrm
VERSION: 1.0
DATE: 18-Jan-2017
Prepared By:
Software Group,
Nexteer Automotive,
Saginaw, MI, USA
Location: The official version of this document is stored in the Nexteer Configuration Management System.
Revision History
| Sl. No. | Description | Author | Version | Date |
| 1 | Initial version | Avinash James | 1.0 | 18-Jan-2017 |
Table of Contents
3.2 Global Functions(Non RTE) to be provided to Integration Project 6
4 Configuration REQUIREMeNTS 7
4.2 Configuration Files to be provided by Integration Project 7
4.3 Da Vinci Parameter Configuration Changes 7
4.4 DaVinci Interrupt Configuration Changes 7
4.5 Manual Configuration Changes 7
5 Integration DATAFLOW REQUIREMENTS 8
5.1 Required Global Data Inputs 8
5.2 Required Global Data Outputs 8
5.3 Specific Include Path present 8
Abbrevations And Acronyms
| Abbreviation | Description |
| DFD | Design functional diagram |
| MDD | Module design Document |
References
This section lists the title & version of all the documents that are referred for development of this document
| Sr. No. | Title | Version |
| 1 | FDD : ES999A_ElecGlbPrm_Design | See Synergy sub project version |
| 2 | Software Naming Conventions | Process 4.02.01 |
| 3 | Software Design and Coding Standards | Process 4.02.01 |
Dependencies
SWCs
| Module | Required Feature |
| None |
Global Functions(Non RTE) to be provided to Integration Project
Configuration REQUIREMeNTS
Build Time Config
| Modules | Notes | |
| None |
Configuration Files to be provided by Integration Project
ElecGlbPrm_Cfg.h
Da Vinci Parameter Configuration Changes
| Parameter | Notes | SWC |
| /Nexteer/ElecGlbPrm/ ElecGlbPrmCfg | Electrical global parameters which are configurable |
Note:
Refer the CM010 RH850 Mcu Config for configuration of Electrical global config paramters
DaVinci Interrupt Configuration Changes
| ISR Name | VIM # | Priority Dependency | Notes |
| None |
Manual Configuration Changes
| Constant | Notes | SWC |
| None |
Integration DATAFLOW REQUIREMENTS
Required Global Data Inputs
None
Required Global Data Outputs
None
Specific Include Path present
Yes.
Runnable Scheduling
This section specifies the required runnable scheduling.
| Init | Scheduling Requirements | Trigger |
| Runnable | Scheduling Requirements | Trigger |
Memory Map REQUIREMENTS
Mapping
| Memory Section | Contents | Notes |
| None | ||
* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.
Usage
| Feature | RAM | ROM |
| None |
Table 1: ARM Cortex R4 Memory Usage
NvM Blocks
None
Compiler Settings
Preprocessor MACRO
None.
Optimization Settings
None.