SerlComTrcvIf_IntegrationManual
Integration Manual
For
SerlComTrcvIf
VERSION: 1.0
DATE: 21-FEB-2018
Prepared By:
Software Group,
Nexteer Automotive,
Saginaw, MI, USA
Location: The official version of this document is stored in the Nexteer Configuration Management System.
Revision History
| Sl. No. | Description | Author | Version | Date |
| 1 | Initial version (based on Design 1.1.0) | Krzysztof Byrski | 1.0 | 21-Feb-2018 |
Table of Contents
3.2 Global Functions(Non RTE) to be provided to Integration Project 6
4 Configuration REQUIREMeNTS 7
4.2 Configuration Files to be provided by Integration Project 7
4.3 Da Vinci Parameter Configuration Changes 7
4.4 DaVinci Interrupt Configuration Changes 7
4.5 Manual Configuration Changes 7
5 Integration DATAFLOW REQUIREMENTS 8
5.1 Required Global Data Inputs 8
5.2 Required Global Data Outputs 8
5.3 Specific Include Path present 8
Abbrevations And Acronyms
| Abbreviation | Description |
| DFD | Design functional diagram |
| MDD | Module design Document |
| FDD | Functional Design Document |
References
This section lists the title & version of all the documents that are referred for development of this document
| Sr. No. | Title | Version |
| 1 | EA4 Software Naming Conventions | 1.02 |
| 2 | Software Design and Coding Standards | 2.01 |
| 3 | ES340A_SerlComTrcvIf_Design | See Synergy Sub Project Version |
Dependencies
SWCs
| Module | Required Feature |
| Spi | Spi.h |
Note : Referencing the external components should be avoided in most cases. Only in unavoidable circumstance external components should be referred. Developer should track the references.
Global Functions(Non RTE) to be provided to Integration Project
None
Configuration REQUIREMeNTS
Build Time Config
| Modules | Notes | |
| None |
Configuration Files to be provided by Integration Project
SerlComTrcvIf_Cfg.h
Da Vinci Parameter Configuration Changes
| Parameter | Notes | SWC |
| SERLCOMTRCVIF_PASSSTEP_CNT_U16 | Error accumulator pass step | ES340A |
DaVinci Interrupt Configuration Changes
| ISR Name | VIM # | Priority Dependency | Notes |
| None |
Manual Configuration Changes
| Constant | Notes | SWC |
| None |
Integration DATAFLOW REQUIREMENTS
Required Global Data Inputs
None
Required Global Data Outputs
Refer FDD
Specific Include Path present
No
Runnable Scheduling
This section specifies the required runnable scheduling.
| Init | Scheduling Requirements | Trigger |
| SerlComTrcvIfInit1 | None | RTE(Init) |
| Runnable | Scheduling Requirements | Trigger |
| SerlComTrcvIfPer1 | None | RTE(100ms) |
Memory Map REQUIREMENTS
Mapping
| Memory Section | Contents | Notes |
| SerlComTrcvIf_START_SEC_CODE | Code |
* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.
Usage
| Feature | RAM | ROM |
| N/A |
Table 1: ARM Cortex R4 Memory Usage
NvM Blocks
None
Compiler Settings
Preprocessor MACRO
None
Optimization Settings
None
Appendix
New handle for configured SpiChannel is required:
SpiConf_SpiChannel_SerlComTrcvIfCh1
New handle for configured SpiSequence is required:
SpiConf_SpiSequence_SerlComTrcvIfSeq1
Both handlers are described in Design DataDict.m file.