McalErrHndlg_IntegrationManual
Integration Manual
For
McalErrHndlg
VERSION: 1
DATE: 5-30-2017
Prepared By:
Jared Julien,
Nexteer Automotive,
Saginaw, MI, USA
Location: The official version of this document is stored in the Nexteer Configuration Management System.
Revision History
| Sl. No. | Description | Author | Version | Date | Approved By |
| 1 | Initial version | J. Julien | 1.0 | - | - |
Table of Contents
3.2 Global Functions(Non RTE) to be provided to Integration Project 6
4 Configuration REQUIREMeNTS 7
4.2 Configuration Files to be provided by Integration Project 7
4.3 Da Vinci Parameter Configuration Changes 7
4.4 DaVinci Interrupt Configuration Changes 7
4.5 Manual Configuration Changes 7
5 Integration DATAFLOW REQUIREMENTS 8
5.1 Required Global Data Inputs 8
5.2 Required Global Data Outputs 8
5.3 Specific Include Path present 8
Abbrevations And Acronyms
| Abbreviation | Description |
|---|---|
| DFD | Design functional diagram |
| MDD | Module design Document |
| <ADD more to the table if applicable> | |
References
This section lists the title & version of all the documents that are referred for development of this document
| Sr. No. | Title | Version |
|---|---|---|
| 1 | MDD Guidelines | Process 04.00.00 |
| 2 | Software Naming Conventions | Process 04.00.00 |
| 3 | Software Coding Standards | Process 04.00.00 |
| 4 | AR099A_McalErrHndlg_Design | See Synergy subproject version |
Dependencies
SWCs
| Module | Required Feature |
|---|---|
| None | N/A |
Note : Referencing the external components should be avoided in most cases. Only in unavoidable circumstance external components should be referred. Developer should track the references.
Global Functions(Non RTE) to be provided to Integration Project
HndlMcalWrVrfyErr
Fls_CallSwitchBFlashErrorNotification
HndlMcalDemErr
Configuration REQUIREMeNTS
Build Time Config
| Modules | Notes | |
|---|---|---|
| None |
Configuration Files to be provided by Integration Project
Da Vinci Parameter Configuration Changes
| Parameter | Value | SWC |
|---|---|---|
| /Renesas/EcucDefs_Dio/Dio/DioGeneral/DioWriteVerifyErrorInterface | HndlMcalWrVrfyErr | Dio |
| /Renesas/EcucDefs_Fls/Fls/FlsGeneral/FlsWriteVerifyErrorInterface | HndlMcalWrVrfyErr | Fls |
| /Renesas/EcucDefs_Mcu/Mcu/McuGeneralConfiguration/McuWVErrorNotification | HndlMcalWrVrfyErr | Mcu |
| /Renesas/EcucDefs_Port/Port/PortGeneral/PortWriteVerifyErrorInterface | HndlMcalWrVrfyErr | Port |
| /Renesas/EcucDefs_Spi/Spi/SpiGeneral/SpiWriteVerifyErrorInterface | HndlMcalWrVrfyErr | Spi |
| /Renesas/DriverA/Wdg/WdgGeneral/WdgWriteVerifyErrorInterface | HndlMcalWrVrfyErr | Wdg |
DaVinci Interrupt Configuration Changes
| ISR Name | VIM # | Priority Dependency | Notes |
|---|---|---|---|
| N/A |
Manual Configuration Changes
| Constant | Notes | SWC |
|---|---|---|
| N/A |
Integration DATAFLOW REQUIREMENTS
Required Global Data Inputs
None
Required Global Data Outputs
None
Specific Include Path present
Yes
Runnable Scheduling
This section specifies the required runnable scheduling.
| Init | Scheduling Requirements | Trigger |
|---|---|---|
| McalErrHndlgInit1 | None | RTE |
| Runnable | Scheduling Requirements | Trigger |
|---|---|---|
| McalErrHndlgPer1 | None | 10 ms |
.
Memory Map REQUIREMENTS
Mapping
| Memory Section | Contents | Notes |
|---|---|---|
| McalErrHndlg_START_SEC_RAMCODE | Functions | Must be mapped to executable RAM* |
* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.
*See Fls module integration manual for more information on setting up this special RAM section.
NvM Blocks
*See DataDict.m
Compiler Settings
Preprocessor MACRO
None
Optimization Settings
N/A
Appendix
Memory Mapping Changes for MCAL DEM error reporting redirect
The MemMap.h of the integration project needs to include some special definitions for capture the error reporting from the MCAL components Fls, Mcu, and Spi to the DEM. This is accomplished by adding the following definition into the MemMap section definitions for the module.
#include "McalErrHndlg.h"
#define Dem_ReportErrorStatus HndlMcalDemErr
The sections into which the above definition must be placed are listed below:
MCU_START_SEC_PRIVATE_CODE
SPI_START_SEC_CODE_FAST
FLS_START_SEC_PRIVATE_CODE
And a corresponding undefine needs to be placed in the corresponding STOP sections as follows:
#undef Dem_ReportErrorStatus
In the following sections:
MCU_STOP_SEC_PRIVATE_CODE
SPI_STOP_SEC_CODE_FAST
FLS_STOP_SEC_PRIVATE_CODE