Sr. No.	Title	Version
1	FDD – ES225A_HwTq10Meas_Design	See Synergy sub project version
2	Software Naming Conventions	01.01.00
3	Software Design and Coding Standards	2.1

Dependencies

SWCs

Module	Required Feature
None

Global Functions(Non RTE) to be provided to Integration Project

None

Configuration REQUIREMeNTS

Build Time Config

Modules	Notes
None

Configuration Files to be provided by Integration Project

Parameter	Notes	SWC
None

Da Vinci Parameter Configuration Changes

Parameter	Notes	SWC
None

DaVinci Interrupt Configuration Changes

ISR Name	VIM #	Priority Dependency	Notes
None

Manual Configuration Changes

Constant	Notes	SWC
None

Integration DATAFLOW REQUIREMENTS

Required Global Data Inputs

Refer DataDict.m file in the FDD

Required Global Data Outputs

Refer DataDict.m file file in the FDD

Specific Include Path present

Runnable Scheduling

This section specifies the required runnable scheduling.

Init	Scheduling Requirements	Trigger
HwTq10MeasInit1	None	RTE (Init)

Runnable	Scheduling Requirements	Trigger
HwTq10MeasPer1	None	RTE (2 ms)
HwTq10MeasPer2	None	RTE (100 ms)
HwTq10MeasHwTq10AutTrim_Oper	None	Server invocation
HwTq10MeasHwTq10ClrTrim_Oper	None	Server invocation
HwTq10MeasHwTq10ReadTrim_Oper	None	Server invocation
HwTq10MeasHwTq10TrimPrfmdSts_Oper	None	Server invocation
HwTq10MeasHwTq10WrTrim_Oper	None	Server invocation

Memory Map REQUIREMENTS

Mapping

Memory Section	Contents	Notes
HwTq10Meas_START_SEC_CODE

* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.

Usage

Feature	RAM	ROM
None

Table 1: ARM Cortex R4 Memory Usage

NvM Blocks

RTE NvM Blocks

Block Name

HwTq10Offs

Note : Size of the NVM block if configured in developer

Compiler Settings

Preprocessor MACRO

None.

Optimization Settings

None.

Appendix

None

2 - HwTq10Meas_MDD

Module Design Document

For

HwTq10Meas

12-Jan-2018

Prepared By:

Software Engineering,

Nexteer Automotive,

Saginaw, MI, USA

Change History

Description	Author	Version	Date
Initial Version	Pratik Jadhav	1.0	12-Jan-2018

Table of Contents

1 Introduction 5

1.1 Purpose 5

1.2 Scope 5

2 HwTq10Meas High-Level Description 6

3 Design details of software module 7

3.1 Graphical representation of HwTq10Meas 7

3.2 Data Flow Diagram 7

3.2.1 Component level DFD 7

3.2.2 Function level DFD 7

4 Constant Data Dictionary 8

4.1 Program (fixed) Constants 8

4.1.1 Embedded Constants 8

5 Software Component Implementation 9

5.1 Sub-Module Functions 9

5.1.1 Init: HwTq10MeasInit1 9

5.1.1.1 Design Rationale 9

5.1.2 Per: HwTq10MeasPer1 9

5.1.2.1 Design Rationale 9

5.1.3 Per: HwTq10MeasPer2 9

5.1.3.1 Design Rationale 9

5.2 Server Runnables 10

5.2.1 HwTq10MeasHwTq10AutTrim 10

5.2.1.1 Design Rationale 10

5.2.2 HwTq10MeasHwTq10ClrTrim 10

5.2.2.1 Design Rationale 10

5.2.3 HwTq10MeasHwTq10ReadTrim 10

5.2.3.1 Design Rationale 10

5.2.4 HwTq10MeasHwTq10TrimPrfmdSts 10

5.2.4.1 Design Rationale 10

5.2.5 HwTq10MeasHwTq10WrTrim 10

5.2.5.1 Design Rationale 10

5.3 Interrupt Functions 10

5.4 Module Internal (Local) Functions 11

5.4.1 Local Function #1 11

5.4.1.1 Design Rationale 11

5.4.2 Local Function #2 11

5.4.2.1 Design Rationale 11

5.4.3 Local Function #3 11

5.4.3.1 Design Rationale 11

6 Known Limitations with Design 12

7 UNIT TEST CONSIDERATION 13

Appendix A Abbreviations and Acronyms 14

Appendix B Glossary 15

Appendix C References 16

Introduction

Purpose

Refer to FDD.

Scope

HwTq10Meas High-Level Description

Refer to FDD

Design details of software module

Graphical representation of HwTq10Meas

Data Flow Diagram

Component level DFD

Refer to FDD

Function level DFD

Refer to FDD

Constant Data Dictionary

Program (fixed) Constants

Embedded Constants

Local Constants

Constant Name	Resolution	Units	Value
CRCTBLSIZE_CNT_U08	1	Cnt	16U

* Refer to FDD for other constant definitions

Software Component Implementation

Sub-Module Functions

Init: HwTq10MeasInit1

Design Rationale

None

Per: HwTq10MeasPer1

Design Rationale

Clear local buffer in the below path of the model has not been implemented, because it’s not required.

Path : ES225A_HwTq10Meas/HwTq10Meas/HwTq10MeasPer1/Raw Data Processing/Clear Local Buffer

Per: HwTq10MeasPer2

Design Rationale

None

Server Runnables

HwTq10MeasHwTq10AutTrim

Design Rationale

None

HwTq10MeasHwTq10ClrTrim

Design Rationale

None

HwTq10MeasHwTq10ReadTrim

Design Rationale

None

HwTq10MeasHwTq10TrimPrfmdSts

Design Rationale

None

HwTq10MeasHwTq10WrTrim

Design Rationale

None

Interrupt Functions

None

Module Internal (Local) Functions

Local Function #1

Function Name	StuckNoDataSeln	Type	Min	Max
Arguments Passed	NA	N/A	N/A	N/A
Return Value	MissMsgEna_Uls_T_u08	uint8	0	1

Design Rationale

This function is split from Per1 to reduce path count and cyclomatic complexity.

Local Function #2

Function Name	RngChk	Type	Min	Max
Arguments Passed	Temp_Cnt_T_u32	uint32	0	4294967295
Return Value	RngChk_Cnt_T_logl	boolean	TRUE	FALSE

Design Rationale

This function is split from Per1 to reduce path count and cyclomatic complexity.

Local Function #3

Function Name	CrcChk	Type	Min	Max
Arguments Passed	CalcdCrc_Cnt_T_u16	uint16	0	15
Arguments Passed	AntcptdCrc_Cnt_T_u16	uint16	0	15
Return Value	CRCFaildPrmByte_Cnt_T_u08	uint8	0	1

Design Rationale

This function is split from Per1 to reduce path count and cyclomatic complexity.

Known Limitations with Design

None.

UNIT TEST CONSIDERATION

Clear local buffer in the below path of the model has not been implemented, because it’s not required. Path : ES225A_HwTq10Meas/HwTq10Meas/HwTq10MeasPer1/Raw Data Processing/Clear Local Buffer

Abbreviations and Acronyms

Abbreviation or Acronym	Description
MDD	Module Design Document
DFD	Data Flow Diagram

Glossary

Note: Terms and definitions from the source “Nexteer Automotive” take precedence over all other definitions of the same term. Terms and definitions from the source “Nexteer Automotive” are formulated from multiple sources, including the following:

ISO 9000
ISO/IEC 12207
ISO/IEC 15504
Automotive SPICE® Process Reference Model (PRM)
Automotive SPICE® Process Assessment Model (PAM)
ISO/IEC 15288
ISO 26262
IEEE Standards
SWEBOK
PMBOK
Existing Nexteer Automotive documentation

References

Ref. #	Title	Version
1	AUTOSAR Specification of Memory Mapping	v1.3.0 R4.0 Rev 2
2	MDD Guideline	EA4 01.00.01
3	EA4 Software Naming Conventions	01.01.00
4	Software Design and Coding Standards	2.1
5	FDD – ES225A_HwTq10Meas_Design	See Synergy sub project version

3 - HwTq10Meas_PeerReview

Overview

Summary Sheet
Synergy Project
Davinci Files
Source Code
MDD
PolySpace
Integration Manual

Sheet 1: Summary Sheet

Rev 2.00

29-Nov-17

Nexteer SWC Implementation Peer Review Summary Sheet

Component Short Name:

Windows User: Intended Use: Identify which component is being reviewed. This should match the component short name from the DataDict.m fileand the middle part of the Synergy project name, e.g. Assi for the SF001A_Assi_Impl Synergy project

HwTq10Meas

Revision / Baseline:

Windows User: Intended Use: Identify the implementation baseline name intended to be used for the changed component when changes are approved E.g. SF001A_Assi_Impl_1.2.0

ES225A_HwTq10Meas_Impl_1.0.0

Change Owner:

Windows User: Intended Use: Identify the developer who made the change(s) being reviewed

Pratik H Jadhav

Work CR ID:

Windows User: Intended Use: Identify the Implementation Work CR whose work is being reviewed (may be more than one)

EA4#15525

kzshz2: Intended Use: Intended to identify at a high level to the reviewers which areas of the component have been changed. Rationale: This will be good information to know when ensuring appropriate reviews have been completed. Modified File Types:

Check the file types that needed modification for the Work CR(s); macros for the check boxes will populate the appropriate checklist tabs for the review.

kzshz2: Intended Use: Identify who where the reviewers, what they reviewed, and if the reviewed changes have been approved to release the code for testing. Comments here should be at a highlevel, the specific comments should be present on the specific review form sheet. Rationale: Since this Form will be attached to the Change Request it will confirm the approval and provides feedback in case of audits. ADD DR Level Move reviewer and approval to individual checklist form Review Checklist Summary:

Reviewed:

At start of review, all items below should be marked "No". At the end of the review, all items should be marked "Yes" or "N/A" where N/A indicates the reviewers have reviewed the existing (unchanged) item and confirmed no updates were needed for the Work CR(s).

Yes

MDD

Yes

Source Code

Yes

PolySpace

Yes

Integration Manual

Yes

Davinci Files

Comments:

General Guidelines:
- The reviews shall be performed over the portions of the component that were modified as a result of the Change Request.
- New components should include SWC Owner and/or SWC Design author and Integrator and/or SW Lead as apart of the Group Review Board (Source Code, Integration Manual, and Davinci Files)
- Enter any rework required into the comment field and select No. When the rework is complete, review again using this same review sheet and select Yes. Add date and additional comment stating that the rework is completed.
- To review a component with multiple source code files use the "Add Source" button to create a Source code tab for each source file.
- .h file should be reviewed with the source file as part of the source file.

Each peer review shall start with a clean copy of the latest peer review checklist template. Before the peer review, the change owner shall:
o Review the previous component peer review and copy any relevant comments to the new review sheet.
o Review all checklist items and make all corrections needed, so that the component is ready for peer review. The expectation is that peer review should find very few issues,
because the change owner has already used the checklist to ensure the component changes are complete and correct.
o Fill in all file name and version information as needed on peer review checklist tabs (file names may be copied from the previous peer review where appropriate)
o Fill in checklist answers (Yes/No/NA pulldowns) ONLY on those items which are NA for the current change. All other checklist items should be blank going into the review
meeting.

During the peer review meeting:
o For each page of the review, first review the items already marked as N/A for this change, to confirm that reviewers agree with this assessment; change the checklist box to
blank if it is found that the item does apply.
o Then review the items with the checklist box blank. After reviewing each of these items, the checklist box will be marked as "Yes", or the checklist box will be marked as
"No" with needed rework indicated or with rationale indicated.
o If any items are marked "No" with rationale indicated, this must be approved by a software supervisor or the software manager; there is a line in the "Review Board" section
of each tab to indicate who approved the "No" items on that tab.

Sheet 2: Synergy Project

Rev 2.00

29-Nov-17

Peer Review Meeting Log (Component Synergy Project Review)

Quality Check Items:

Rationale is required for all answers of No

New baseline version name from Summary Sheet follows

Yes

Comments:

naming convention

Project contains necessary subprojects

Yes

Comments:

Project contains the correct version of subprojects

Yes

Comments:

Design subproject is correct version

Yes

Comments:

.gpj file in tools folder matches .gpj generated by TL109 script

Yes

Comments:

File/folder structure is correct per documentation in

Yes

Comments:

TL109A_SwcSuprt

General Notes / Comments:

Review Board:

Change Owner:

Pratik Jadhav

Review Date :

01/12/18

Lead Peer Reviewer:

Krishna Anne

Approved by Reviewer(s):

Yes

Other Reviewer(s):

Matt Leser

Rationale/justification for items marked "No" approved by:

Sheet 3: Davinci Files

Rev 2.00

29-Nov-17

Nexteer SWC Implementation Peer Review Meeting Log (Davinci Review)

Quality Check Items:

Rationale is required for all answers of No

Only StdDef Port interfaces and datatypes are used

Yes

Comments:

(compare against TL107B to ensure only implementation

data types are used)

OBSOLETE/OBSELETE doesn’t appear in any arxml file

Yes

Comments:

Do all port interface names end in PortIf and a sequence

Yes

Comments:

number

Non-program-specific components saved

Yes

Comments:

in Autosar 4.0.3 format

For components with generated configurable content:

Yes

Comments:

*Cfg.arxml.TT: Verfied Davinci Configurator imported the

change correctly

*Cfg.h.TT: Verfied Davinci Configurator generates

Yes

Comments:

the configuration header file(s) correctly

All changed files have been compared against previous

kzshz2: Intended Use: Identify if previous version was compared and only the expected change(s) was present. This is for text files only, not binary or GUIs Rationale: This is helpful in identifying unapproved (intended or mistaken) changes.

N/A

Comments: initial version

versions (If available) and changes match changes

needed as described by the work CR(s), all parent CRs

and parent anomalies, and the SWC Design change log.

Davinci files accurately implement SWC Design (DataDict.m

Yes

Comments:

file) in all areas where arxml was changed and/or the

DataDict.m file was changed as shown by

comparing the DataDict.m from the current SWC Design

with the DataDict.m used in the previous implementation.

(This is NOT always the predecessor.)

Automated validation check is performed with no issues found

Yes

Comments:

Naming conventions followed. All names should

Yes

Comments:

match DataDict.m

Sender/Receiver port properties match DataDict.m file

Yes

Comments:

(name, data type, direction)

Calibration port properties match DataDict.m file

N/A

Comments:

(name, data type)

Sender/Receiver port initialization values match

Yes

Comments:

DataDict.m file and have been converted to counts

for fixed point types

Calibration port initialization values match

N/A

Comments:

DataDict.m file and have been converted to counts

for fixed point types

Mapping set and all unused items have been

Yes

Comments:

removed

All sender/receiver port read/writes using "Write (explicit)"

Yes

Comments:

and "Read (explicit by argument)"(List justification if not)

Runnable calling frequencies match DataDict.m file

Yes

Comments:

Runnable port access matches the DataDict.m file

Yes

Comments:

DataDict.m display variables: created as

N/A

Comments:

PerInstanceMemory. Name and data type match DataDict.m file.

Per Instance Memory names and data types

Yes

Comments:

match DataDict.m file

NVM blocks match DataDict.m file

Yes

Comments:

(Named per naming convention. Default block

used if specified in DataDict.m file. Data type

matches DatatDict.m file)

Component is correct component type

Yes

Comments:

General Notes / Comments:

Review Board:

Change Owner:

Pratik Jadhav

Review Date :

01/12/18

Component Type :

Application

Lead Peer Reviewer:

Krishna Anne

Approved by Reviewer(s):

Yes

Integrator and or
SW lead:

Xin Liu

Comments:

Other Reviewer(s):

Matt Leser

Rationale/justification for items marked "No" approved by:

Sheet 4: Source Code

Rev 2.00

29-Nov-17

Nexteer SWC Implementation Peer Review Meeting Log (Source Code Review)

Source File Name:

HwTq10Meas

Source File Revision:

Windows User: Intended Use: Synergy version number of the file being reviewed. (Version number that Synergy displays on the checked out or unmodified file in the working project) 1

Header File Name:

Header File Revision:

Windows User: Intended Use: Synergy version number of the file being reviewed. (Version number that Synergy displays on the checked out or unmodified file in the working project)

MDD Name:

HwTq10Meas_MDD.docx

Revision:

Windows User: Intended Use: Synergy version number of the file being reviewed. (Version number that Synergy displays on the checked out or unmodified file in the working project) 1

SWC Design Name:

ES225A_HwTq10Meas_Design

Revision:

Windows User: Intended Use: For FDDs, list the Synergy baseline number (just the number part of the Synergy baseline name) of the FDD baseline being implemented. E.g., for SF001A_Assi_Design_1.3.1, this field would say "1.3.1" 1.8.0

Quality Check Items:

Rationale is required for all answers of No

EA4 Common Naming Convention followed:

Version: 1.0

EA4 Software Naming Convention followed:

Version: 1.1

for variable names

Yes

Comments:

for constant names

Yes

Comments:

for function names

Yes

Comments:

for other names (component, memory

Yes

Comments:

mapping handles, typedefs, etc.)

Verified no possibility of uninitialized variables being

N/A

Comments:

written to component outputs or IRVs

Any requirements traceability tags have been removed

N/A

Comments:

from at least the changed areas of code

All variables are declared at the function level.

Yes

Comments:

Synergy version matches change history

kzshz2: Intended Use: Indicate that the the versioning was confirmed by the peer reviewer(s). Rationale: There have been many occassions where versions were not updated in files and as a result Unit Test were referencing wrong versions. This often time leads to the need to re-run of batch tests.

Yes

Comments:

and Version Control version in file comment block

Change log contains detailed description of changes

Yes

Comments:

(including any anomaly number(s) being fixed) and

Work CR number

Code accurately implements SWC Design (Document or Model)

Yes

Comments:

in all areas where code was changed and/or Simulink

model was color-coded as changed and/or mentioned

in SWC Design change log. (This item includes looking at all

layers of Simulink model for possible color coding not

reflected at a higher level, and includes looking at any

intermediate SWC Design versions between the version being

implemented and the version that was included as a

subproject in the previous implementation.)

Code comparison against previous version matches

N/A

Comments:

changes needed as described by the work CR(s), all

Initial Version

parent CRs and parent anomalies, and the SWC

Design change log.

Verified no Compiler Errors or Warnings

KMC: Intended Use: To confirm no compiler errors or warnings exist for the code under review (warnings from contract header files may be ignored). Rationale: This is needed to ensure there will be no errors discovered at the time of integration. A Sandox project should be used.

Yes

Comments:

(and verified for all possible combinations

of any conditionally compiled code)

Component.h is included

N/A

Comments:

All other includes are actually needed. (System includes

Yes

Comments:

only allowed in Nexteer library components)

Software Design and Coding Standards followed:

Windows User: Intended Use: list version/revision of latest released Software Design and Coding Standards document. Version:

Code comments are clear, correct, and adequate

Yes

Comments:

and have been updated for the change: [N40] and

all other rules in the same section as rule [N40],

plus [N75], [N12], [N23], [N33], [N37], [N38],

[N48], [N54], [N77], [N79], [N72]

Source file (.c and .h) comment blocks are per

Yes

Comments:

standards and contain correct information: [N41], [N42]

Function comment blocks are per standards and

Yes

Comments:

contain correct information: [N43]

Code formatting (indentation, placement of

Yes

Comments:

braces, etc.) is per standards: [N5], [N55], [N56],

[N57], [N58], [N59]

Embedded constants used per standards; no

Yes

Comments:

"magic numbers": [N12]

Memory mapping for non-RTE code

N/A

Comments:

is per standard

All access of motor control loop data uses macros

N/A

Comments:

generated by the motor control manager

All loops have termination conditions that ensure

Yes

Comments:

finite loop iterations: [N63]

All divides protect against divide by zero

Yes

Comments:

if needed: [N65]

All integer division and modulus operations

Yes

Comments:

handle negative numbers correctly: [N76]

All typecasting and fixed point arithmetic,

Yes

Comments:

including all use of fixed point macros and

timer functions, is correct and has no possibility

of unintended overflow or underflow: [N66]

All float-to-unsigned conversions ensure the.

Yes

Comments:

float value is non-negative: [N67]

All conversions between signed and unsigned

N/A

Comments:

types handle msb==1 as intended: [N78]

All pointer dereferencing protects against

Yes

Comments:

null pointer if needed: [N70]

Component outputs are limited to the legal range

Yes

Comments:

defined in the SWC Design DataDict.m file : [N53]

All code is mapped with SWC Design (all SWC

Yes

Comments:

Design subfunctions and/or model blocks identified

with code comments; all code corresponds to

some SWC Design subfunction and/or model block):

[N40]

Any other violations of design and coding

Yes

Comments:

standards noticed during the review are noted in the

comments section for rework.

Anomaly or Design Work CR created

Yes

Comments: List Anomaly or CR numbers

for any SWC Design corrections needed

General Notes / Comments:

Review Board:

Change Owner:

Pratik jadhav

Review Date :

01/12/18

Lead Peer Reviewer:

Krishna Anne

Approved by Reviewer(s):

Yes

SWC owner and/or
SWC Design author:

Srikar

Comments:

Raghavendra

Integrator and or
SW lead:

Xin Liu

Comments:

Unit test co-ordinator:

Comments:

Other Reviewer(s):

Matt Leser

Rationale/justification for items marked "No" approved by:

Sheet 5: MDD

Rev 2.00

29-Nov-17

Nexteer SWC Implementation Peer Review Meeting Log (MDD Review)

MDD Name:

HwTq10Meas_MDD.docx

MDD Revision:

Source File Name:

HwTq10Meas

Source File Revision:

Source File Name:

Source File Revision:

Source File Name:

Source File Revision:

Quality Check Items:

Rationale is required for all answers of No

Synergy version matches document

Yes

Comments:

Change log contains detailed description of changes

Yes

Comments:

Changes Highlighted (for Unit Tester)

N/A

Comments:

Diagrams have been included per MDD Guideline

Yes

Comments:

and reviewed

All Design Exceptions and Limitations are listed

Yes

Comments:

Design rationale given for all global

Yes

Comments:

data not communicated through RTE ports, per

Design and Coding Standards rules [N9] and [N10].

All implementation details that differ from the SWC

Yes

Comments:

Design are noted and explained in Design Rationale

All Unit Test Considerations have been described

Yes

Comments:

General Notes / Comments:

Review Board:

Change Owner:

Pratik Jadhav

Review Date :

01/12/18

Lead Peer Reviewer:

Krishna Anne

Approved by Reviewer(s):

Yes

Other Reviewer(s):

Matt Leser

Rationale/justification for items marked "No" approved by:

Sheet 6: PolySpace

Rev 2.00

29-Nov-17

Nexteer SWC Implementation Peer Review Meeting Log (PolySpace Review)

Source File Name:

HwTq10Meas.c

Source File Revision:

Source File Name:

Source File Revision:

Source File Name:

Source File Revision:

EA4 Static Analysis Compliance Guideline version:

01.04.00

Poly Space version:

Windows User: eg. 2013b

R2013b

TL109A sub project version:

2.2.0

Quality Check Items:

Rationale is required for all answers of No

tools/local folders' header files are appropriate and

Yes

Comments:

function prototypes match the latest component version

100% Compliance to the EA4 Static Analysis

Yes

Comments:

Compliance Guideline

Are previously added justification and deviation

N/A

Comments:

comments still appropriate

Do all MISRA deviation comments use approved

Yes

Comments:

deviation tags

For any component source files (.c, .h, generated Cfg.c and Cfg.h)

N/A

Comments:

with conditional compilation, has Polyspace been run with all

combinations of build constants that can be used together in a build?

(Note which conditional compilation results have been archived)

Cyclomatic complexity and Static path count OK

Yes

Comments:

for all functions in the component per Design

and Coding Standards rule [N47]

General Notes / Comments:

Review Board:

Change Owner:

Pratik Jadhav

Review Date :

01/12/18

Lead Peer Reviewer:

Krishna Anne

Approved by Reviewer(s):

Yes

Other Reviewer(s):

Matt Leser

Rationale/justification for items marked "No" approved by:

Sheet 7: Integration Manual

Rev 2.00

29-Nov-17

Nexteer SWC Implementation Peer Review Meeting Log (Integration Manual Review)

Integration Manual Name:

kzshz2: Intended Use: Identify which file is being reviewed Rationale: Required for traceability. It will help to ensure this sheet is not attached to the wrong design review form. HwTq10Meas_IntegrationManual.doc

Integration Manual Revision:

kzshz2: Intended Use: Identify which version of the integration manual has been reviewed. 1

Quality Check Items:

Rationale is required for all answers of No

Synergy version matches header

Yes

Comments:

Latest template used

Yes

Comments:

Change log contains detailed description of changes

Yes

Comments:

Changes Highlighted (for Integrator)

N/A

Comments:

General Notes / Comments:

Review Board:

Change Owner:

Pratik Jadhav

Review Date :

01/12/18

Lead Peer Reviewer:

Krishna Anne

Approved by Reviewer(s):

Yes

Integrator and or
SW lead:

Xin Liu

Comments:

Other Reviewer(s):

Matt Leser

Rationale/justification for items marked "No" approved by: