This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Component Design

Component Design

Component Documentation

Reports

1 - CF018A_GmRoadWhlInQlfr_Design_PeerReviewChkList

Nexteer_Template_V1.0

Overview

Peer Review Instructions
Technical Review Checklist
Template Change Log

Sheet 1: Peer Review Instructions

Instructions for Functional Design Package Peer Review




PRE-MEETING


Function OwnerConfirm that requirements are reviewed and approved PRIOR to the FDP peer review

Function OwnerStart with latest version of the template for any "first reviews" - Continue to use existing temmplate for re-reviews

Function OwnerProvide the functional design package (changed documents) to the invited attendees 1-2 working days in advance of review

Function OwnerNotify the assigned peer reviewer and make sure they are prepared to do their function in the meeting

Function OwnerIdentify necessary attendance and invite to meeting

Function OwnerComplete the "Author" column information for sections 1 through 5 prior to the review

Function OwnerComplete the attendance invitation list in section 7

Function OwnerFor Re-reviews only: Complete the column "remarks by author" to identify actions taken to address items found in earlier reviews.



DURING MEETING


Function OwnerPresent document changes to the review team

Peer ReviewerCapture attendance of the review

Peer ReviewerCapture actions and issues in section 6. Identify issue summary, Document type, Reference (Requirement ID, section number, etc), Defect Type and indicate status as "OPEN"



POST MEETING


Function OwnerFollow up on all "open" items. Update "Summary of Resolution" to indicate what was done or decided.

Function OwnerSchedule follow up review OR review open items with peer reviewer and obtain agreement to close

Peer ReviewerClose change request in system and confirm all associated tasks are complete. Upload peer review checklist (this document) with any FDP updates

Sheet 2: Technical Review Checklist

Technical Review Checklist - Template Version 02.02.00







Product NameElectric Power SteeringElectrical Arch.4Review ScopeDefect TypeNumbers




YesClosedFR
Function IDCF018A_GmRoadWhlInQlfr

CR#7659Requirement0




NoRejectedFDD
Long NameGM Road Wheel Input Qualifier

Interface0




NAOpenModel
Version that you started from. NOT the version you hope to release. If this will be v1.0.0, enter NA. Starting Baseline1.2.0EffortDesign0






FMEA
AuthorTing ZhanReview Effort(Hrs.)
Standards0






*.m File


Corr+Verf effort(Hrs.)
Documentation0






Cal Process


Total Effort (Hrs.)0.00Others0













Total0







Checklist No.Description of CheckAuthor: This column is for Self review. Author shall fill Yes/No/NA against each point in checklist. AuthorAuthor: This column is for reviewer. Reviewer shall fill Yes/No/NA against each point in checklist. ReviewerAuthor: Detailed Description of the finding shall be provided by the reviewer. Description of finding by reviewerAuthor: Defect type to be selected. Defect TypeAuthor: What action is taken to fix the comment & other remarks need to be filled by author. Remarks By AuthorAuthor: Data in this column shall be filled by reviewer after checking whether the rework is completed. Status







1Section 1: Data Dictionary














Is Filename of Data Dictionary in correct format?YesYes












Is the FDD.Version property correctly updated?YesYes












Is the Data Dictionary Verification report error free?NoNoUnits will be added in the list/EngMax is acceptable











Does FDD Long Name, Short Name, and Description match requirements?YesYes












Are all runnables defined?YesYes












Do runnables have the correct time step?YesYes












Do server runnables correctly define arguments?YesYes












Are all clients defined?YesYes












Do client definitions match the corresponding server runnable?YesYes












Does name and metadata of every signal match its corresponding interface signal?YesYes












Do output signal ranges match requirements (check DOOR min/max attributes too)?YesYes












Are calibration tables named correctly (e.g. AssiX and AssiY)?NANA












Are all data types represented by released Data_Management classes?YesYes












Do all calibrations have correct values for all metadata?YesYes












Is NVM defined in the appropriate number of blocks?NANA












Are constants defined with proper scope (local vs global)?YesYes












Are all dependent constants and calibrations included in one file?YesYes












Does FDD.DesignASIL match requirements?YesYes



























2Section 2: ModelAuthor: This column is for Self review. Author shall fill Yes/No/NA against each point in checklist. AuthorAuthor: This column is for reviewer. Reviewer shall fill Yes/No/NA against each point in checklist. ReviewerAuthor: Detailed Description of the finding shall be provided by the reviewer. Description of finding by reviewerAuthor: Defect type to be selected. Defect TypeAuthor: What action is taken to fix the comment & other remarks need to be filled by author. Remarks By AuthorAuthor: Data in this column shall be filled by reviewer after checking whether the rework is completed. Status








Is filename of model in correct format?YesYes












Is Top level of model annotated with Requirements Baseline?YesYes












Is the Top level of the model annotated with Tool Dependencies?YesYes












Is Top level of model annotated with Change Log or History?YesYes












Is the 2nd level of model free from subsystems that are not Function-Call Subsystems?YesYes












Is the 2nd level of model free from arithmetic and logic operations?YesYes












Are the Runnable trigger signals named as "call_<Runnable>"?YesYes












Does 2nd level of model have a properly updated annotation with name, description, and intended baseline number?YesYes












Are all data flow layers free of Function-Call Subsystems and Memory Store blocks?YesYes












Does the Model have the confidentiality and copyright information inside all its Subsystems?YesYes












Are all the Memory Store blocks for PIM and Display Variables located on the 2nd level of model?YesYes












Is each diagnostic (NTC) capable of being set to "PASS"?YesYes












Does non-zero intialization of PIM occur in the function's Init runnable?YesYes












Does design properly include Set Ram Block Status when NVM RAM values change?NANA












Does model include appropriate logic for dealing with missing or corrupted NVM data?NANA












Does model execute without errors/warnings after loading NxtrMBDConfig configuration set?YesYes



























3Section 3: Requirements LinkingAuthor: This column is for Self review. Author shall fill Yes/No/NA against each point in checklist. AuthorAuthor: This column is for reviewer. Reviewer shall fill Yes/No/NA against each point in checklist. ReviewerAuthor: Detailed Description of the finding shall be provided by the reviewer. Description of finding by reviewerAuthor: Defect type to be selected. Defect TypeAuthor: What action is taken to fix the comment & other remarks need to be filled by author. Remarks By AuthorAuthor: Data in this column shall be filled by reviewer after checking whether the rework is completed. Status








Are all requirements links of the format <FDDNumber>_<ObjectID>?NoNoNo FDD Number











Does requirements HTML report reference only the DOORS module of this component for all links in the design?YesYes












Are linked blocks linked to the correct requirements(s)? (watch for problems due to copy/pasted blocks)YesYes












Is the list of unlinked blocks acceptable?YesYes



























4Section 4: Model AdvisorAuthor: This column is for Self review. Author shall fill Yes/No/NA against each point in checklist. AuthorAuthor: This column is for reviewer. Reviewer shall fill Yes/No/NA against each point in checklist. ReviewerAuthor: Detailed Description of the finding shall be provided by the reviewer. Description of finding by reviewerAuthor: Defect type to be selected. Defect TypeAuthor: What action is taken to fix the comment & other remarks need to be filled by author. Remarks By AuthorAuthor: Data in this column shall be filled by reviewer after checking whether the rework is completed. Status








Was Model Advisor run with the correct configuration settings?YesYes












Is the Model Advisor rerport free from "Fails".YesYes












Are Model Advisor report "Warnings" acceptable?YesYes



























5Section 5: Delivery PackageAuthor: This column is for Self review. Author shall fill Yes/No/NA against each point in checklist. AuthorAuthor: This column is for reviewer. Reviewer shall fill Yes/No/NA against each point in checklist. ReviewerAuthor: Detailed Description of the finding shall be provided by the reviewer. Description of finding by reviewerAuthor: Defect type to be selected. Defect TypeAuthor: What action is taken to fix the comment & other remarks need to be filled by author. Remarks By AuthorAuthor: Data in this column shall be filled by reviewer after checking whether the rework is completed. Status








Does Design folder contain only the model, data dictionary, and (optionally) a simulation setup script?YesYes












Does Doc folder contain a zipped HTML webview model?YesYes












Was webview model created without requirements highlighted?YesYes












Does Reports folder contain only the data dictionary verification report, Model Advisor report, and zipped requirements traceability report?YesYes



























4Section 6: Other Issus/Actions IdentifiedDocumentReferenceSummary of resolutionAuthor: Defect type to be selected. Defect TypeAuthor: What action is taken to fix the comment & other remarks need to be filled by author. Remarks By AuthorAuthor: Data in this column shall be filled by reviewer after checking whether the rework is completed. Status







4.1





Closed







4.2














4.3














4.4














4.5














4.6














4.7














4.8














4.9














4.10














4.11














4.12














4.13














4.14














4.15














4.16














4.17














4.18














4.19














4.20














4.21














4.22














4.23














4.24














4.25














5Section 7: APPROVALS













RoleFirst ReviewDateAttendanceApproval?










Function Owner*Matthew Tompkins













Peer Reviewer*Price Lefler












Safety













SoftwareNick Saxton












ESG / Systems<Name - if invited>












EPDT / CSE<Name - if invited>












Hardware<Name - if invited>












Test<Name - if invited>












RoleSecond Review (if required)DateAttendanceApproval?










Function Owner*














Peer Reviewer*













Safety













Software













ESG / Systems<Name - if invited>












EPDT / CSE<Name - if invited>












Hardware<Name - if invited>












Test<Name - if invited>












RoleThird Review (if required)DateAttendanceApproval?










Function Owner*














Peer Reviewer*













Safety













Software













ESG / Systems













EPDT / CSE<Name - if invited>












Hardware<Name - if invited>












Test<Name - if invited>












RoleFourth Review (if required)DateAttendanceApproval?










Function Owner*<Owner Name>













Peer Reviewer*<Name>












Safety<Name - if invited>












Software<Name - if invited>












ESG / Systems<Name - if invited>












EPDT / CSE<Name - if invited>












Hardware<Name - if invited>












Test<Name - if invited>












RoleAdd more if necessaryDateAttendanceApproval?










































P.S.:Yes indicates adherence














No indicates non-adherence, reviewer shall provide suitable comments at the end of this document for each point.














NA indicates not applicable













Sheet 3: Template Change Log

RevChangeAuthor
01.00.05Added lesson learned #3.5MDK
01.00.06Added lesson learned #3.6, 3.7 - Structure and writing of NVM in mfiles and models.MDK
02.00.00Combined ESG and Systems into one, compatible with Data_Management 2.13.0 of CreateDD and VerifyDD.K. Derry
02.01.00Added: Does FDD.DesignASIL match requirements?
Added: Was webview model created without requirements highlighted?
Removed: Redundant row in Data Dictionary section.
Formatting: Column C now consistently center-justified.		K. Derry
02.02.00Added: Are all data types represented by released Data_Management classes?
Removed: Are all runnables defined? Rationale: Automated tools checking.
Removed: Does the Component shortname match data dictionary FDD metadata?
Removed: "Data store name must resolve to Simulink signal object"
Edited: Model Advisor report should now be left unzipped.		K. Derry











































































2 - CF018A_GmRoadWhlInQlfr_ModelAdvisorReport

Model Advisor Report for 'CF018A_GmRoadWhlInQlfr'
Model Advisor Report - CF018A_GmRoadWhlInQlfr.slx
Simulink version: 8.2Model version: 1.0.0
System: CF018A_GmRoadWhlInQlfrCurrent run: 22-Sep-2016 19:08:42
 Model Advisor configuration: ...NxtrModelAdvisorConfig.mat

Run Summary
PassFailWarningNot RunTotal
   50   0   17   292359


Model Advisor

    By Product

        Simulink

        Simulink Coder

        Embedded Coder

        Simscape

        Simulink Verification and Validation

            Modeling Standards

                DO-178C/DO-331 Checks

                IEC 61508, ISO 26262, and EN 50128 Checks

                MathWorks Automotive Advisory Board Checks

            Requirements Consistency

        Simulink Control Design

    By Task

        Code Generation Efficiency

 Check optimization settings

You should turn on the following optimization(s):

  • Block reduction
  • Remove code from floating-point to integer conversions that wraps out-of-range values
  • Inline invariant signals
  • The Simulation range checking diagnostic is enabled. Because this diagnostic can increase the time it takes to simulate your model, you should consider turning it off, by setting its value to none.
  • Ignore testpoints when generating code
  • Pass reusable subsystem outputs as individual arguments



    •         Frequency Response Estimation

            Managing Data Store Memory Blocks

            Managing Library Links And Variants

            Model Referencing

            Modeling Guidelines for MISRA-C:2004

            Modeling Physical Systems

            Modeling Signals and Parameters using Buses

            Modeling Single-Precision Systems

            Modeling Standards for DO-178C/DO-331

            Modeling Standards for EN 50128

            Modeling Standards for IEC 61508

            Modeling Standards for ISO 26262

     Display model metrics and complexity report

    Display number of elements and name, level, and depth of subsystems for the model or subsystem

    Model metrics information
    Display number of elements for Simulink blocks and Stateflow constructs


    Summary

    Element TypeCount
    Inport108
    Outport122
    SubSystem115


    Simulink

    Block TypeCount
    Outport122
    SubSystem115
    Inport108
    Constant91
    Merge46
    ActionPort43
    DataStoreWrite28
    Product26
    From26
    DataStoreRead25
    DataTypeConversion25
    DataStoreMemory22
    Goto22
    If22
    Sum19
    S-Function12
    RelationalOperator12
    Terminator9
    Rounding4
    TriggerPort2
    Logic2
    Step2
    EnablePort2
    Clock1
    ∧ Less

    Model complexity information
    Display name, level, and depth of subsystems


    Maximum Subsystem Depth: 8

    Subsystem Depth

    Subsystem NameLevelDepth
    CopyRight211
    GmRoadWhlInQlfr17
    GmRoadWhlInQlfr/CopyRight221
    GmRoadWhlInQlfr/GmRoadWhlInQlfrInit124
    GmRoadWhlInQlfr/GmRoadWhlInQlfrInit1/CopyRight231
    GmRoadWhlInQlfr/GmRoadWhlInQlfrInit1/Enumerated Constant231
    GmRoadWhlInQlfr/GmRoadWhlInQlfrInit1/Enumerated Constant331
    GmRoadWhlInQlfr/GmRoadWhlInQlfrInit1/NTC 0x0E3 Passd33
    GmRoadWhlInQlfr/GmRoadWhlInQlfrInit1/NTC 0x0E3 Passd/SetNtcSts42
    GmRoadWhlInQlfr/GmRoadWhlInQlfrInit1/NTC 0x0E3 Passd/SetNtcSts/CopyRight251
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer126
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp35
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld44
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld53
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Add 1024 due to rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Add 1024 due to rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Add 65536 due to rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Add 65536 due to rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Output RawRiFrq RiFrqVld to true RiFrqOutOfRng to false62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Output RawRiFrq RiFrqVld to true RiFrqOutOfRng to false/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /RiDeltaPls No Rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /RiDeltaPls No Rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /RiDeltaTiStampCnt No Rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /RiDeltaTiStampCnt No Rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Set RawRiFrq to 55.48 RiWhlFrqVld to false RiFrqOutOfRng to true62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Set RawRiFrq to 55.48 RiWhlFrqVld to false RiFrqOutOfRng to true/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Set RiWhlFrqVld false RiFrqChgOutOfRng to true Output Prev RiWhlFrq62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Set RiWhlFrqVld false RiFrqChgOutOfRng to true Output Prev RiWhlFrq/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Upd RiWhlFrq and RiWhlFrqVld RiFrqChgOutOfRng to false62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Upd RiWhlFrq and RiWhlFrqVld RiFrqChgOutOfRng to false/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /CopyRight251
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetRefTmr100MicroSec32bit52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetRefTmr100MicroSec32bit/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetTiSpan100MicroSec32bit53
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetTiSpan100MicroSec32bit/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetTiSpan100MicroSec32bit/No wrapping62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetTiSpan100MicroSec32bit/No wrapping/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetTiSpan100MicroSec32bit/Wrapping62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /GetTiSpan100MicroSec32bit/Wrapping/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Prev RiWhlFrq and RiWhlFrqVld RiFrqOutOfRng to false RiFrqChgOutOfRng to false RiWhlDiagFlg to false51
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/CopyRight241
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Prev RiWhlFrq and RiWhlFrqVld RiFrqOutOfRng to false RiFrqChgOutOfRng to false RiWhlDiagFlg to false41
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp35
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld44
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld53
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Add 1024 due to rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Add 1024 due to rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Add 65536 due to rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Add 65536 due to rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /LeDeltaPls No Rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /LeDeltaPls No Rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /LeDeltaTiStampCnt No Rollover62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /LeDeltaTiStampCnt No Rollover/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Output RawLeFrq LeFrqVld to true LeFrqOutOfRng to false62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Output RawLeFrq LeFrqVld to true LeFrqOutOfRng to false/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Set LeWhlFrqVld false LeFrqChgOutOfRng to true Output Prev LeWhlFrq62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Set LeWhlFrqVld false LeFrqChgOutOfRng to true Output Prev LeWhlFrq/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Set RawLeFrq to 55.48 LeWhlFrqVld to false LeFrqOutOfRng to true62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Set RawLeFrq to 55.48 LeWhlFrqVld to false LeFrqOutOfRng to true/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Upd LeWhlFrq and LeWhlFrqVld LeFrqChgOutOfRng to false62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Upd LeWhlFrq and LeWhlFrqVld LeFrqChgOutOfRng to false/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /CopyRight251
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetRefTmr100MicroSec32bit52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetRefTmr100MicroSec32bit/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetTiSpan100MicroSec32bit53
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetTiSpan100MicroSec32bit/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetTiSpan100MicroSec32bit/No wrapping62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetTiSpan100MicroSec32bit/No wrapping/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetTiSpan100MicroSec32bit/Wrapping62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /GetTiSpan100MicroSec32bit/Wrapping/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Prev LeWhlFrq and LeWhlFrqVld LeFrqOutOfRng to false LeFrqChgOutOfRng to false LeWhlDiagFlg to false51
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/CopyRight241
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Prev LeWhlFrq and LeWhlFrqVld LeFrqOutOfRng to false LeFrqChgOutOfRng to fasse LeWhlDiagFlg to false41
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/CopyRight231
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag35
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/Enumerated Constant241
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/Enumerated Constant341
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild44
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit0Sts fail52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit0Sts fail/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit0Sts pass52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit0Sts pass/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit1Sts fail52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit1Sts fail/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit1Sts pass52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit1Sts pass/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit4Sts fail52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit4Sts fail/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit4Sts pass52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit4Sts pass/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit5Sts fail52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit5Sts fail/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit5Sts pass52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Bit5Sts pass/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/CopyRight251
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Enumerated Constant251
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/Enumerated Constant351
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/NTC 0x0E353
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/NTC 0x0E3/SetNtcSts62
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Faild/NTC 0x0E3/SetNtcSts/CopyRight271
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Passd43
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Passd/SetNtcSts52
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/NTC Diag/NTC 0x0E3 Passd/SetNtcSts/CopyRight261
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Set Min Le whl Frq and false32
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Set Min Le whl Frq and false /CopyRight241
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Set Min Ri whl Frq and false32
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Set Min Ri whl Frq and false /CopyRight241
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/WhlLeFrq_LimStat_f3231
    GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/WhlRiFrq_LimStat_f3231
    call_GmRoadWhlInQlfrInit112
    call_GmRoadWhlInQlfrInit1/CopyRight221
    call_GmRoadWhlInQlfrPer112
    call_GmRoadWhlInQlfrPer1/CopyRight221
    ∧ Less


     Check for model objects that do not link to requirements

    Check Simulink blocks and Stateflow objects that do not link to a requirements document

    Warning
    The following blocks do not link to a requirement document:

    ∧ Less
    Recommended Action
    For each object in the list, in the Model Editor, right-click the block, select Requirements, and specify a requirement.



            Modeling Standards for MAAB

                Naming Conventions

     Check folder names

    Identify folders using incorrect characters and formatting.

    See Also

    Warning
    The following folders have incorrect names:

    FolderIncorrect Character or Format
    C:/Work/CF018A_GmRoadWhlInQlfr_Design/CF018A_GmRoadWhlInQlfr_Design_v1.3.0/DesignFolder name includes incorrect characters or formatting.


    Recommended Action
    Rename the above folders to remove incorrect characters and formatting.

     Check subsystem names

    Identify subsystem names that use characters that are not correct in C code.

    See Also

    Warning
    The following subsystem names contain incorrect characters:

    ErrorSubsystem block
    Name contains incorrect characters...../Chk Curr and Prev RiWhlDstTiStamp
    Name contains incorrect characters...../Calc RiWhlFrq and RiWhlFrqVld
    Name contains incorrect characters...../Calc RiWhlFrq and RiWhlFrqVld
    Name contains incorrect characters...../Add 1024 due to rollover
    Name contains incorrect characters...../Add 65536 due to rollover
    Name contains incorrect characters.....rq RiFrqVld to true RiFrqOutOfRng to false
    Name contains incorrect characters...../RiDeltaPls No Rollover
    Name contains incorrect characters...../RiDeltaTiStampCnt No Rollover
    Name contains incorrect characters.....RiWhlFrqVld to false RiFrqOutOfRng to true
    Name contains incorrect characters.....rqChgOutOfRng to true Output Prev RiWhlFrq
    Name contains incorrect characters..... and RiWhlFrqVld RiFrqChgOutOfRng to false
    Name contains incorrect characters...../GetTiSpan100MicroSec32bit/No wrapping
    Name contains incorrect characters.....gOutOfRng to false RiWhlDiagFlg to false
    Name contains incorrect characters.....gOutOfRng to false RiWhlDiagFlg to false
    Name contains incorrect characters...../Calc LeWhlFrq and LeWhlFrqVld
    Name contains incorrect characters...../Calc LeWhlFrq and LeWhlFrqVld
    Name contains incorrect characters...../Add 1024 due to rollover
    Name contains incorrect characters...../Add 65536 due to rollover
    Name contains incorrect characters...../LeDeltaPls No Rollover
    Name contains incorrect characters...../LeDeltaTiStampCnt No Rollover
    Name contains incorrect characters.....rq LeFrqVld to true LeFrqOutOfRng to false
    Name contains incorrect characters.....rqChgOutOfRng to true Output Prev LeWhlFrq
    Name contains incorrect characters.....LeWhlFrqVld to false LeFrqOutOfRng to true
    Name contains incorrect characters..... and LeWhlFrqVld LeFrqChgOutOfRng to false
    Name contains incorrect characters...../GetTiSpan100MicroSec32bit/No wrapping
    Name contains incorrect characters.....gOutOfRng to false LeWhlDiagFlg to false
    Name contains incorrect characters.....gOutOfRng to fasse LeWhlDiagFlg to false
    Name contains incorrect characters...../GmRoadWhlInQlfrPer1/NTC Diag
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit0Sts fail
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit0Sts pass
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit1Sts fail
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit1Sts pass
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit4Sts fail
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit4Sts pass
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit5Sts fail
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Faild/Bit5Sts pass
    Name contains incorrect characters...../NTC Diag/NTC 0x0E3 Passd
    Name contains incorrect characters...../Set Min Le whl Frq and false
    Name contains incorrect characters...../Set Min Ri whl Frq and false
    ∧ Less


    Recommended Action
    Rename the subsystem blocks using correct characters.

     Check character usage in block names

    Identify block names that use characters that are not correct in C code.

    See Also

    Warning
    The following block names use characters that are not correct for C code:

    Error typeBlock
    Name contains incorrect characters...../Function-Call Generator
    Name contains incorrect characters...../Function-Call Generator


    Recommended Action
    Rename the block using correct characters.



                Model Architecture

     Check for mixing basic blocks and subsystems

    Identify levels in the model that include basic blocks and subsystems. Each level of a model must be designed with blocks of the same level (for example, only subsystems or only basic blocks).

    See Also

    Warning
    The following level(s) in the model include basic blocks and subsystems:

    SystemBlock path
    CF018A_GmRoadWhlInQlfrCF018A_GmRoadWhlInQlfr/Clock
    CF018A_GmRoadWhlInQlfrCF018A_GmRoadWhlInQlfr/CopyRight2
    CF018A_GmRoadWhlInQlfrCF018A_GmRoadWhlInQlfr/Data Store Read5
    CF018A_GmRoadWhlInQlfrCF018A_GmRoadWhlInQlfr/Data Store Write
    CF018A_GmRoadWhlInQlfrCF018A_GmRoadWhlInQlfr/Step
    CF018A_GmRoadWhlInQlfrCF018A_GmRoadWhlInQlfr/Step1
    CF018A_GmRoadWhlInQlfr/GmRoadWhlInQlfr..../GmRoadWhlInQlfr/CopyRight2
    ..../GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1..../GmRoadWhlInQlfrPer1/CopyRight2
    ..../GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1..../GmRoadWhlInQlfrPer1/Data Store Write1
    ..../GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1..../GmRoadWhlInQlfrPer1/Data Store Write2
    ..../GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1..../GmRoadWhlInQlfrPer1/Logical Operator1
    ..../GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1..../GmRoadWhlInQlfrPer1/WhlLeFrq_LimStat_f32
    ..../GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1..../GmRoadWhlInQlfrPer1/WhlRiFrq_LimStat_f32
    ..../Chk Curr and Prev RiWhlDstTiStamp..../CopyRight2
    ..../Chk Curr and Prev RiWhlDstTiStamp..../Data Store Read1
    ..../Chk Curr and Prev RiWhlDstTiStamp..../Data Store Write
    ..../Chk Curr and Prev RiWhlDstTiStamp..../Data Store Write2
    ..../Chk Curr and Prev RiWhlDstTiStamp..../Relational Operator
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Constant
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Constant1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../CopyRight2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Read
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Write1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Product
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Product1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Relational Operator
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Abslt_f32_f32
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Constant
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Constant1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Constant2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Constant3
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Constant4
    ..../Calc RiWhlFrq and RiWhlFrqVld..../CopyRight2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Read1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Read4
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Read7
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Write1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Write2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Write3
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Write4
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Data Store Write5
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Divide1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../FPM_u16_FixedToFloat_m
    ..../Calc RiWhlFrq and RiWhlFrqVld..../FPM_u16_FixedToFloat_m1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../FPM_u16_FixedToFloat_m2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Product1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Product2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Relational Operator
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Relational Operator1
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Relational Operator2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Relational Operator3
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Subtract2
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Subtract3
    ..../Calc RiWhlFrq and RiWhlFrqVld..../Calc RiWhlFrq and RiWhlFrqVld /Subtract4
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/CopyRight2
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Count per uSec
    ..../GetTiSpan100MicroSec32bit..../Data Store Read1
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Divide1
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Divide2
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Max Counts
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Product2
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Product3
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Rounding
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Subtract3
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/uSec per Sec
    ..../ChkCurrandPrevLeWhlDstTiStamp..../ChkCurrandPrevLeWhlDstTiStamp/CopyRight2
    ..../ChkCurrandPrevLeWhlDstTiStamp..../Data Store Read
    ..../ChkCurrandPrevLeWhlDstTiStamp..../Data Store Write
    ..../ChkCurrandPrevLeWhlDstTiStamp..../Data Store Write2
    ..../ChkCurrandPrevLeWhlDstTiStamp..../Relational Operator
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Constant
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Constant1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../CopyRight2
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Read
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Write1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Product
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Product1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Relational Operator
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Abslt_f32_f32
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Constant
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Constant1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Constant2
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Constant3
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Constant4
    ..../Calc LeWhlFrq and LeWhlFrqVld..../CopyRight2
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Read1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Read4
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Read7
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Write1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Write2
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Write3
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Write4
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Data Store Write5
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Divide
    ..../Calc LeWhlFrq and LeWhlFrqVld..../FPM_u16_FixedToFloat_m
    ..../Calc LeWhlFrq and LeWhlFrqVld..../FPM_u16_FixedToFloat_m1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../FPM_u16_FixedToFloat_m2
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Product1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Product2
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Relational Operator
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Relational Operator1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Relational Operator2
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Relational Operator3
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Subtract
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Subtract1
    ..../Calc LeWhlFrq and LeWhlFrqVld..../Calc LeWhlFrq and LeWhlFrqVld /Subtract2
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/CopyRight2
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Count per uSec
    ..../GetTiSpan100MicroSec32bit..../Data Store Read1
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Divide1
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Divide2
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Max Counts
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Product2
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Product3
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Rounding
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/Subtract3
    ..../GetTiSpan100MicroSec32bit..../GetTiSpan100MicroSec32bit/uSec per Sec
    ..../GmRoadWhlInQlfrPer1/NTC Diag..../GmRoadWhlInQlfrPer1/NTC Diag/Constant7
    ..../GmRoadWhlInQlfrPer1/NTC Diag..../GmRoadWhlInQlfrPer1/NTC Diag/Constant8
    ..../GmRoadWhlInQlfrPer1/NTC Diag..../NTC Diag/Enumerated Constant2
    ..../GmRoadWhlInQlfrPer1/NTC Diag..../NTC Diag/Enumerated Constant3
    ..../GmRoadWhlInQlfrPer1/NTC Diag..../NTC Diag/Logical Operator
    ..../GmRoadWhlInQlfrPer1/NTC Diag..../NTC Diag/NTC 0x0E3 Passd
    ..../NTC Diag/NTC 0x0E3 Faild..../NTC Diag/NTC 0x0E3 Faild/Add
    ..../NTC Diag/NTC 0x0E3 Faild..../NTC Diag/NTC 0x0E3 Faild/Constant7
    ..../NTC Diag/NTC 0x0E3 Faild..../NTC Diag/NTC 0x0E3 Faild/CopyRight2
    ..../NTC Diag/NTC 0x0E3 Faild..../NTC 0x0E3 Faild/Enumerated Constant2
    ..../NTC Diag/NTC 0x0E3 Faild..../NTC 0x0E3 Faild/Enumerated Constant3
    ..../NTC Diag/NTC 0x0E3 Faild..../NTC Diag/NTC 0x0E3 Faild/NTC 0x0E3
    ∧ Less


    Recommended Action
    If possible, replace blocks at the identified level of the model hierarchy with basic blocks. Move nonvirtual blocks into the identified subsystem.



                Model Configuration Options

                Simulink

     Check for Simulink diagrams using nonstandard display attributes

    Identify nonstandard display attributes in Simulink diagrams.

    See Also

    _________________________________________________________________________________________

    Check format settings
    Identify incorrect model-level format options.

    Passed
    The format options are correct.
    _________________________________________________________________________________________

    Check block colors
    Identify blocks using nonstandard colors.

    Warning
    The following blocks use nonstandard colors:

    ∧ Less
    Recommended Action
    Set the block foreground color to black and the background color to white.
    _________________________________________________________________________________________

    Check canvas colors
    Identify canvases that are not white.

    Passed
    All diagrams use a white canvas.
    _________________________________________________________________________________________

    Check diagram zoom
    Identify diagrams that do not have zoom factor set to 100 %.

    Warning
    The following diagrams do not have zoom factor set to 100 percent:

    ∧ Less
    Recommended Action
    For each listed diagram, select View > Zoom > Normal View (100%).

     Check font formatting

    Identify inconsistent formatting of text.

    See Also

    Warning
    Font formatting is not consistent.

    The following font characteristics are used in the model/subsystem. Font characteristics are sorted by number of occurrences. The most common characteristics are bold.
    Font NameFont SizeFont Style

    Helvetica
    Arial

    10
    14
    9

    normal



    Recommended Action
    To have consistent font formatting, click Modify All Fonts to apply the font formatting selected in the input parameters above to all objects.

    Input Parameters Selection
    NameValue
    Font NameCommon
    Font SizeCommon
    Font StyleCommon

     Check positioning and configuration of ports

    Identify input and output ports with incorrect positioning and configurations.

    See Also

    _________________________________________________________________________________________

    Check Inport blocks position
    Identify Inport blocks that result in left-flowing signals.

    Passed
    There are no Inport blocks in the model that result in left-flowing signals.
    _________________________________________________________________________________________

    Check Outport block position
    Identify Outport blocks that result in left-flowing signals.

    Passed
    There are no Outport blocks in the model that result in left-flowing signals.
    _________________________________________________________________________________________

    Check port orientation
    Identify port blocks with nondefault orientation.

    Passed
    All ports use the default orientation.
    _________________________________________________________________________________________

    Check for duplicate Inports blocks
    Identify duplicate Inport blocks.

    Passed
    All Inport blocks in the model are used once.

     Check visibility of block port names

    Identify port block names that are not uniformly displayed. The block names must all be displayed or none displayed. Library blocks are an exception to this rule. This check ignores masked and subsystem blocks.

    See Also

    _________________________________________________________________________________________

    Check for incorrect port name display
    Identify ports that are incorrectly displaying names.

    Passed
    Subsystem blocks are correctly displayed.
    _________________________________________________________________________________________

    Check for incorrect subsystem port name display
    Identify subsystems that are incorrectly displaying names.

    Passed
    Subsystem blocks are correctly displayed.

    Input Parameters Selection
    NameValue
    Display all port names (Diagram > Format > Show Block Name).true

     Check the display attributes of block names

    Identify whether to display block names.

    See Also

    _________________________________________________________________________________________

    Check for blocks with hidden names and obvious function
    Identify block names that are displayed but can be hidden due to obvious behavior.

    Passed
    All blocks with obvious behavior have hidden names.
    _________________________________________________________________________________________

    Check for non-descriptive displayed block names
    Identify block names that are displayed but should be hidden due to a lack of a descriptive name.

    Warning
    The following blocks have a name displayed, however, the name is not descriptive:

    ∧ Less
    Recommended Action
    Modify the block name to provide descriptive information, or hide the block name by deselecting (Diagram > Format > Show Block Name).
    _________________________________________________________________________________________

    Check for missing block names
    Identify block names that are hidden but should be displayed to show a descriptive name.

    Warning
    The following blocks have descriptive names, however, the names are hidden:

    ∧ Less
    Recommended Action
    Modify the blocks to show the block name (Diagram > Format > Show Block Name).

     Check signal line labels

    Identify blocks that require labeled signals. A subset of source and destination blocks require labeled signals.

    See Also

    _________________________________________________________________________________________

    Check source block labels
    The following source blocks require labeled signals; Inport, From, Data Store Read, Constant, Bus Selector, Demux, Selector. If the signal name is visible on the block, this rule is considered met.

    Warning
    The following signals have no label:

    ∧ Less
    Recommended Action
    Add a new or propagated label to the signal line.
    _________________________________________________________________________________________

    Check destination block labels
    The following destination blocks require labeled signals; Outport, Goto, Data Store Write, Bus Creator, Mux, Subsystem, Chart. If the signal name is visible on the source block, this rule is considered met.

    Warning
    The following signals have no label:

    ∧ Less
    Recommended Action
    Add a new or propagated label to the signal line.

     Check for propagated signal labels

    Identify propagated labels on signal lines.

    See Also

    _________________________________________________________________________________________

    Check subsystem input labels
    Identify subsystem inputs that are labeled and display propagated signals.

    Passed
    All inputs to the subsystem have labels and display propagated signals.
    _________________________________________________________________________________________

    Check subsystem output labels
    Identify outputs from subsystems that are labeled and display signal propagation.

    Passed
    All outputs from the subsystem have labels and display propagated signals.
    _________________________________________________________________________________________

    Signal propagation for nonsubsystem blocks
    Identify the signal propagation status for both transformative and nontransformative blocks.

    Passed
    All outputs from non subsystem blocks correctly use labels and display propagated signals.



                Stateflow

     Check usage of exclusive and default states in state machines

    Identify Stateflow charts and substates that incorrectly use or define exclusive and default states.
    Note: This check does not support charts that use MATLAB as the action language.

    See Also

    _________________________________________________________________________________________

    Check Stateflow charts for exclusive states
    Identify Stateflow charts that have singular exclusive (OR) states.

    Passed
    The Stateflow charts do not have singular exclusive (OR) states.
    _________________________________________________________________________________________

    Check Stateflow charts for undefined default states
    Identify Stateflow charts that do not define default states.

    Passed
    Each Stateflow chart defines a default state.
    _________________________________________________________________________________________

    Check for multiple states assigned as the default state
    At the root level in the Stateflow hierarchy only one state should be assigned as the default.

    Passed
    The root level of the chart has only one default state assigned.
    _________________________________________________________________________________________

    Check for substates with singular OR states
    States configured as OR should always be part of a group of states.

    Passed
    No singular OR states were detected.
    _________________________________________________________________________________________

    Check for substates without default states defined
    At every level in the Stateflow hierarchy a default state should be assigned.

    Passed
    All substates have default states assigned.
    _________________________________________________________________________________________

    Check for substates with multiple default states defined
    At every level in the Stateflow hierarchy only one state should be assigned as the default.

    Passed
    All levels of the chart have only one default state assigned.

     Check transition orientations in flowcharts

    Identify transitions in Stateflow flowcharts that are drawn incorrectly.

    See Also

    _________________________________________________________________________________________

    Check for conditions drawn vertically
    Condition expressions should be drawn on the horizontal segments of flowcharts.

    Passed
    All conditions expressions were drawn horizontally.
    _________________________________________________________________________________________

    Check for action transitions drawn vertically
    Transition actions should be drawn on the vertical segments of flowcharts.

    Passed
    All transitions actions where drawn vertically.
    _________________________________________________________________________________________

    Check for junctions for default transitions
    All Junctions in a flow chart should have a default exit transition.

    Passed
    All Junctions have a default exit transition.
    _________________________________________________________________________________________

    Check for transitions that combine condition and action
    Flowcharts should not combine condition evaluations and action expressions in a single transition.

    Passed
    No combined expressions where found in the chart.



                MATLAB Functions

            Requirements Consistency Checking

            Simulation Accuracy

            Simulation Runtime Accuracy Diagnostics

     Runtime diagnostics for S-functions

    This model contains the following C-MEX S-functions:

    IDS-FunctionBlock
    1C:\Users\sz7vy6\Documents\MATLAB\Dependencies\Nexteer_Utilities v4.8.0\EA4_Library\Math\Abslt_f32_f32.mexw64CF018A_GmRoadWhlInQlfr/GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /Abslt_f32_f32
      CF018A_GmRoadWhlInQlfr/GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/ChkCurrandPrevLeWhlDstTiStamp/Calc LeWhlFrq and LeWhlFrqVld /Calc LeWhlFrq and LeWhlFrqVld /Abslt_f32_f32
    2C:\Users\sz7vy6\Documents\MATLAB\Dependencies\Nexteer_Utilities v4.8.0\EA3_Library\FPM_u16_FixedToFloat_m.mexw64CF018A_GmRoadWhlInQlfr/GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /FPM_u16_FixedToFloat_m
      CF018A_GmRoadWhlInQlfr/GmRoadWhlInQlfr/GmRoadWhlInQlfrPer1/Chk Curr and Prev RiWhlDstTiStamp/Calc RiWhlFrq and RiWhlFrqVld /Calc RiWhlFrq and RiWhlFrqVld /FPM_u16_FixedToFloat_m1
      ...

    Consider setting Solver data inconsistency [?] to either error or warning (currently set to none) to validate whether S-functions adhere to the ODE solver consistency rules that Simulink applies to its built-in blocks.

    Consider setting ArrayBounds exceeded [?]to either error or warning (currently set to none) to check if S-functions are writing outside array boundaries.

    Note: These runtime diagnostics may slow down simulation considerably. You should set them back to none once you have verified that they do not cause any warnings or errors during simulation.

     Check if Read/Write diagnostics are enabled for Data Store blocks

    Note: These runtime diagnostics may slow down simulation considerably. You should set them back to Disable all once you have verified that they do not cause any warnings or errors during simulation.



            Simulink Model File Integrity

            Upgrading to the Current Simulink Version