Component Implementation

• 1: GmRoadWhlInQlfr_IntegrationManual
• 2: GmRoadWhlInQlfr_MDD
• 3: GmRoadWhlInQlfr_PeerReview

1 - GmRoadWhlInQlfr_IntegrationManual

Integration Manual

For

GmRoadWhlInQlfr

VERSION: 1.0

DATE: 02-MAR-2016

Prepared By:

Nick Saxton,

Nexteer Automotive,

Saginaw, MI, USA

Revision History

Table of Contents

1 Abbrevations And Acronyms 4

2 References 5

3 Dependencies 6

3.1 SWCs 6

3.2 Global Functions(Non RTE) to be provided to Integration Project 6

4 Configuration REQUIREMeNTS 7

4.1 Build Time Config 7

4.2 Configuration Files to be provided by Integration Project 7

4.3 Da Vinci Parameter Configuration Changes 7

4.4 DaVinci Interrupt Configuration Changes 7

4.5 Manual Configuration Changes 7

5 Integration DATAFLOW REQUIREMENTS 8

5.1 Required Global Data Inputs 8

5.2 Required Global Data Outputs 8

5.3 Specific Include Path present 8

6 Runnable Scheduling 9

7 Memory Map REQUIREMENTS 10

7.1 Mapping 10

7.2 Usage 10

7.3 Non RTE NvM Blocks 10

7.4 RTE NvM Blocks 10

8 Compiler Settings 11

8.1 Preprocessor MACRO 11

8.2 Optimization Settings 11

9 Appendix 12

Abbrevations And Acronyms

References

This section lists the title & version of all the documents that are referred for development of this document

Dependencies

SWCs

Note : Referencing the external components should be avoided in most cases. Only in unavoidable circumstance external components should be referred. Developer should track the references.

Global Functions(Non RTE) to be provided to Integration Project

None

Configuration REQUIREMeNTS

Build Time Config

Configuration Files to be provided by Integration Project

None

Da Vinci Parameter Configuration Changes

DaVinci Interrupt Configuration Changes

Manual Configuration Changes

Integration DATAFLOW REQUIREMENTS

Required Global Data Inputs

See DataDict.m file

Required Global Data Outputs

See DataDict.m file

Specific Include Path present

No

Runnable Scheduling

This section specifies the required runnable scheduling.

Memory Map REQUIREMENTS

Mapping

* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.

Usage

Table 1: ARM Cortex R4 Memory Usage

NvM Blocks

None

Compiler Settings

Preprocessor MACRO

None

Optimization Settings

None

Appendix

2 - GmRoadWhlInQlfr_MDD

Module Design Document

For

GmRoadWhlInQlfr

March 2, 2016

Prepared For:

Software Engineering

Nexteer Automotive,

Saginaw, MI, USA

Prepared By:

Nick Saxton,

Nexteer Automotive,

Saginaw, MI, USA
Change History

Table of Contents

1 GmRoadWhlInQlfr High-Level Description 5

2 Design details of software module 6

2.1 Graphical representation of GmRoadWhlInQlfr 6

2.2 Data Flow Diagram 6

2.2.1 Component level DFD 6

2.2.2 Function level DFD 6

3 Constant Data Dictionary 7

3.1 Program (fixed) Constants 7

3.1.1 Embedded Constants 7

4 Software Component Implementation 8

4.1 Sub-Module Functions 8

4.1.1 Init: GmRoadWhlInQlfrInit1 8

4.1.1.1 Design Rationale 8

4.1.1.2 Module Outputs 8

4.1.2 Per: GmRoadWhlInQlfrPer1 8

4.1.2.1 Design Rationale 8

4.1.2.2 Store Module Inputs to Local copies 8

4.1.2.3 (Processing of function)……… 8

4.1.2.4 Store Local copy of outputs into Module Outputs 8

4.2 Server Runables 8

4.3 Interrupt Functions 8

4.4 Module Internal (Local) Functions 8

4.4.1 Local Function #1 8

4.4.1.1 Design Rationale 9

4.4.1.2 Processing 9

4.4.2 Local Function #2 9

4.4.2.1 Design Rationale 9

4.4.2.2 Processing 9

4.4.3 Local Function #3 9

4.4.3.1 Design Rationale 10

4.4.3.2 Processing 10

4.5 GLOBAL Function/Macro Definitions 10

5 Known Limitations with Design 11

6 UNIT TEST CONSIDERATION 12

Appendix A Abbreviations and Acronyms 13

Appendix B Glossary 14

Appendix C References 15

GmRoadWhlInQlfr High-Level Description

Refer FDD

Design details of software module

Graphical representation of GmRoadWhlInQlfr

Data Flow Diagram

Refer FDD

Component level DFD

Refer FDD

Function level DFD

Refer FDD

Constant Data Dictionary

Program (fixed) Constants

Embedded Constants

Local Constants

Refer DataDict.m for constants

Software Component Implementation

Sub-Module Functions

Refer FDD

Init: GmRoadWhlInQlfrInit1

Design Rationale

Refer FDD

Module Outputs

Refer FDD

Per: GmRoadWhlInQlfrPer1

Design Rationale

Refer FDD

Store Module Inputs to Local copies

Refer FDD

(Processing of function)………

Refer FDD

Store Local copy of outputs into Module Outputs

Refer FDD

Server Runables

None

Interrupt Functions

None

Module Internal (Local) Functions

Local Function #1

* LeWhlFrqVld_Cnt_T_logl, * WhlLeFrq_Hz_T_f32, *LeFrqOutOfRng_Cnt_T_logl, *LeFrqChgOutOfRng_Cnt_T_logl and *LeWhlDiagFlg_Cnt_T_logl are outputs of this function

Design Rationale

Implementation of "Chk Curr and Prev LeWhlDstTiStamp" block

Processing

Refer FDD

Local Function #2

* RiWhlFrqVld_Cnt_T_logl, * WhlRiFrq_Hz_T_f32, *RiFrqOutOfRng_Cnt_T_logl, *RiFrqChgOutOfRng_Cnt_T_logl and *RiWhlDiagFlg_Cnt_T_logl are outputs of this function

Design Rationale

Implementation of "Chk Curr and Prev RiWhlDstTiStamp" block

Processing

Refer FDD

Local Function #3

Design Rationale

Implementation of "NTC Diag" block and immediately preceding logic

Processing

Refer FDD

GLOBAL Function/Macro Definitions

None

Known Limitations with Design

• None

UNIT TEST CONSIDERATION

• None

Abbreviations and Acronyms

Glossary

Note: Terms and definitions from the source “Nexteer Automotive” take precedence over all other definitions of the same term. Terms and definitions from the source “Nexteer Automotive” are formulated from multiple sources, including the following:

• ISO 9000

• ISO/IEC 12207

• ISO/IEC 15504

• Automotive SPICE® Process Reference Model (PRM)

• Automotive SPICE® Process Assessment Model (PAM)

• ISO/IEC 15288

• ISO 26262

• IEEE Standards

• SWEBOK

• PMBOK

• Existing Nexteer Automotive documentation

References

3 - GmRoadWhlInQlfr_PeerReview

Rev 1.2

8-Jun-15

Peer Review Summary Sheet

Synergy Project Name:

kzshz2: Intended Use: Identify which component is being reviewed. This should be the Module Short Name from Synergy Rationale: Required for traceability. It will help to ensure this form is not attaced to the the wrong change request. CF018A_GmRoadWhlInQlfr_Impl

Revision / Baseline:

kzshz2: Intended Use: Identify which Synergy revision of this component is being reviewed Rationale: Required for traceability. It will help to ensure this form is not attaced to the the wrong change request. CF018A_GmRoadWhlInQlfr_Impl_1.2.1

Change Owner:

kzshz2: Intended Use: Identify the developer who made the change(s) Rationale: A change request may have more than one resolver, this will help identify who made what change. Change owner identification may be required by indusrty standards. Nick Saxton

Work CR ID:

EA4#7735

kzshz2: Intended Use: Intended to identify at a high level to the reviewers which areas of the component have been changed. Rationale: This will be good information to know when ensuring appropriate reviews have been completed. Modified File Types:

kzshz2: Intended Use: Identify who where the reviewers, what they reviewed, and if the reviewed changes have been approved to release the code for testing. Comments here should be at a highlevel, the specific comments should be present on the specific review form sheet. Rationale: Since this Form will be attached to the Change Request it will confirm the approval and provides feedback in case of audits. ADD DR Level Move reviewer and approval to individual checklist form Review Checklist Summary:

Reviewed:

MDD

Source Code

PolySpace

Integration Manual

Davinci Files

Comments:

Updated model to match code

General Guidelines: - The reviews shall be performed over the portions of the component that were modified as a result of the Change Request. - New components should include FDD Owner and Integrator as apart of the Group Review Board (Source Code, Integration Manual, and Davinci Files) - Enter any rework required into the comment field and select No. When the rework is complete, review again using this same review sheet and select Yes. Add date and additional comment stating that the rework is completed. - To review a component with multiple source code files use the "Add Source" button to create a Source code tab for each source file. - .h file should be reviewed with the source file as part of the source file.