Mcu Integration Manual
Integration Manual
For
Mcu
VERSION: 1
DATE: 01/06/16
Prepared By:
Software Group,
Nexteer Automotive,
Saginaw, MI, USA
Location: The official version of this document is stored in the Nexteer Configuration Management System.
Revision History
| Sl. No. | Description | Author | Version | Date |
| 1 | Initial version | Lucas Wendling | 1.0 | 01/06/16 |
Table of Contents
3.2 Global Functions(Non RTE) to be provided to Integration Project 6
4 Configuration REQUIREMeNTS 7
4.2 Configuration Files to be provided by Integration Project 7
4.3 Da Vinci Parameter Configuration Changes 7
4.4 DaVinci Interrupt Configuration Changes 7
4.5 Manual Configuration Changes 7
5 Integration DATAFLOW REQUIREMENTS 8
5.1 Required Global Data Inputs 8
5.2 Required Global Data Outputs 8
5.3 Specific Include Path present 8
Abbrevations And Acronyms
| Abbreviation | Description |
References
This section lists the title & version of all the documents that are referred for development of this document
| Sr. No. | Title | Version |
Dependencies
SWCs
| Module | Required Feature |
Note : Referencing the external components should be avoided in most cases. Only in unavoidable circumstance external components should be referred. Developer should track the references.
Global Functions(Non RTE) to be provided to Integration Project
API usage and scheduling of BSW components expected to be captured at a project architectural level and is beyond the scope of this document. Third party documentation can be referenced as needed.
Configuration REQUIREMeNTS
Configuration of BSW components expected to be captured at a project architectural level and is beyond the scope of this document. Third party documentation can be referenced as needed.
Build Time Config
| Modules | Notes | |
Configuration Files to be provided by Integration Project
N/A
Da Vinci Parameter Configuration Changes
| Parameter | Notes | SWC |
DaVinci Interrupt Configuration Changes
| ISR Name | Notes |
| Patched_MCU_FEINT_ISR | The Mcu module implements an interrupt that needs a patch for a hardware problem that exists on the P1M hardware (see Renesas Technical Update TN-RH8-S001A/E). Nexteer has created the appropriate workaround that subsequently calls the third party Mcu interrupt handler code. Therefore, when configuring the Mcu interrupt in the O/S the interrupt handler name should be configured to the Nexteer code with the workaround (“Patched_MCU_FEINT_ISR”) instead of directly referencing the third party handler Mcu interrupt handler code. |
Manual Configuration Changes
| Constant | Notes | SWC |
Integration DATAFLOW REQUIREMENTS
Required Global Data Inputs
Required Global Data Outputs
Specific Include Path present
Yes
Runnable Scheduling
API usage and scheduling of BSW components expected to be captured at a project architectural level and is beyond the scope of this document. Third party documentation can be referenced as needed.
| Init | Scheduling Requirements | Trigger |
| Runnable | Scheduling Requirements | Trigger |
.
Memory Map REQUIREMENTS
Mapping
| Memory Section | Contents | Notes |
* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.
Usage
| Feature | RAM | ROM |
NvM Blocks
Compiler Settings
Preprocessor MACRO
Optimization Settings
Appendix
<This section is for appendix>