EcuTMeas_IntegrationManual
Integration Manual
For
ECU TEMPERATURE MEASUREMENT
VERSION: 2.0
DATE: 21-MAR-2016
Prepared By:
Krishna Anne,
Nexteer Automotive,
Saginaw, MI, USA
Revision History
| Sl. No. | Description | Author | Version | Date |
| 1 | Initial version | Spandana Balani | 1.0 | 23-Mar-2015 |
| 2 | ADC Hooks are added as input | KK | 2.0 | 21-Mar-2016 |
Table of Contents
3.2 Global Functions(Non RTE) to be provided to Integration Project 6
4 Configuration REQUIREMeNTS 7
4.2 Configuration Files to be provided by Integration Project 7
4.3 Da Vinci Parameter Configuration Changes 7
4.4 DaVinci Interrupt Configuration Changes 7
4.5 Manual Configuration Changes 7
5 Integration DATAFLOW REQUIREMENTS 8
5.1 Required Global Data Inputs 8
5.2 Required Global Data Outputs 8
5.3 Specific Include Path present 8
Abbrevations And Acronyms
| Abbreviation | Description |
| DFD | Design functional diagram |
| MDD | Module design Document |
References
This section lists the title & version of all the documents that are referred for development of this document
| Sr. No. | Title | Version |
| 1 | FDD - ES210A ECU Temperature Measurement | (See project group sub-version in synergy) |
Dependencies
SWCs
| Module | Required Feature |
| None | N/A |
Global Functions(Non RTE) to be provided to Integration Project
Configuration REQUIREMeNTS
Build Time Config
| Modules | Notes | |
| None |
Configuration Files to be provided by Integration Project
Include NxtrFil.h in Rte_UserTypes.h header file
Da Vinci Parameter Configuration Changes
| Parameter | Notes | SWC |
| N/A |
DaVinci Interrupt Configuration Changes
| ISR Name | VIM # | Priority Dependency | Notes |
| N/A |
Manual Configuration Changes
| Constant | Notes | SWC |
| N/A |
Integration DATAFLOW REQUIREMENTS
Required Global Data Inputs
Refer DataDict.m file
Required Global Data Outputs
Refer DataDict.m file
Specific Include Path present
No
Runnable Scheduling
This section specifies the required runnable scheduling.
| Init | Scheduling Requirements | Trigger |
| EcuTMeasInit1 | On Init | Rte_Init |
| Runnable | Scheduling Requirements | Trigger |
| EcuTMeasPer1 | None | RTE 100ms Task |
Memory Map REQUIREMENTS
Mapping
| Memory Section | Contents | Notes |
| None | ||
* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.
Usage
| Feature | RAM | ROM |
| None |
Table 1: ARM Cortex R4 Memory Usage
Non RTE NvM Blocks
| Block Name |
| None |
Note : Size of the NVM block if configured in developer
RTE NvM Blocks
| Block Name |
| None |
Note : Size of the NVM block if configured in developer
Compiler Settings
Preprocessor MACRO
None
Optimization Settings
None