EotProtn_Integration Manual
Integration Manual
For
SF018A_EotProtn
VERSION: 1.0
DATE: 01-Oct-2015
Prepared By:
Sarika Natu,
KPIT Technologies,
India
Location: The official version of this document is stored in the Nexteer Configuration Management System.
Revision History
| Description | Author | Version | Date |
| Initial version | Sarika Natu | 1.0 | 01-Oct-2015 |
Table of Contents
3.2 Global Functions(Non RTE) to be provided to Integration Project 6
4 Configuration REQUIREMeNTS 7
4.2 Configuration Files to be provided by Integration Project 7
4.3 Da Vinci Parameter Configuration Changes 7
4.4 DaVinci Interrupt Configuration Changes 7
4.5 Manual Configuration Changes 7
5 Integration DATAFLOW REQUIREMENTS 8
5.1 Required Global Data Inputs 8
5.2 Required Global Data Outputs 8
5.3 Specific Include Path present 8
Abbrevations And Acronyms
| Abbreviation | Description |
| DFD | Design functional diagram |
| MDD | Module design Document |
References
This section lists the title & version of all the documents that are referred for development of this document
| Sr. No. | Title | Version |
| 1 | MDD Guidelines | Software Process Release 04.02.00 |
| 2 | Software Naming Conventions | Software Process Release 04.02.00 |
| 3 | Design and Coding standards | Software Process Release 04.02.00 |
| 4 | FDD – SF018A_EotProtn_Design | See Synergy sub project version |
Dependencies
SWCs
| Module | Required Feature |
| None |
Global Functions(Non RTE) to be provided to Integration Project
None
Configuration REQUIREMeNTS
Build Time Config
| Modules | Notes | |
| None |
Configuration Files to be provided by Integration Project
None
Da Vinci Parameter Configuration Changes
| Parameter | Notes | SWC |
| None |
DaVinci Interrupt Configuration Changes
| ISR Name | VIM # | Priority Dependency | Notes |
| None |
Manual Configuration Changes
| Constant | Notes | SWC |
| None |
Integration DATAFLOW REQUIREMENTS
Required Global Data Inputs
Refer DataDict.m file in the FDD
Required Global Data Outputs
Refer DataDict.m file in the FDD
Specific Include Path present
No
Runnable Scheduling
This section specifies the required runnable scheduling.
| Init | Scheduling Requirements | Trigger |
| EotProtnInit1 | None | RTE (Init) |
| Runnable | Scheduling Requirements | Trigger |
| EotProtnPer1 | None | RTE(2ms) |
Memory Map REQUIREMENTS
Mapping
| Memory Section | Contents | Notes |
| EotProtn_START_SEC_CODE | ||
* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.
Usage
| Feature | RAM | ROM |
| <Memmap usuage info> |
Table 1: ARM Cortex R4 Memory Usage
NvM Blocks
None
Compiler Settings
Preprocessor MACRO
None
Optimization Settings
None
Appendix
None