HwAgVehCentrTrim_IntegrationManual
Integration Manual
For
HwAgVehCentrTrim
VERSION: 4.0
DATE: 12-Sep-2016
Prepared By:
Nick Saxton,
Nexteer Automotive,
Saginaw, MI, USA
Location: The official version of this document is stored in the Nexteer Configuration Management System.
Revision History
| Sl. No. | Description | Author | Version | Date |
| 1 | Initial version | Nick Saxton | 1.0 | 24-Feb-2016 |
| 2 | Updated NVM data name | Nick Saxton | 2.0 | 04-Apr-2016 |
| 3 | Updated configuration section | Nick Saxton | 3.0 | 14-Jun-2016 |
| 4 | Added Init to runnable scheduling | Nick Saxton | 4.0 | 12-Sep-2016 |
Table of Contents
3.2 Global Functions(Non RTE) to be provided to Integration Project 6
4 Configuration REQUIREMeNTS 7
4.2 Configuration Files to be provided by Integration Project 7
4.3 Da Vinci Parameter Configuration Changes 7
4.4 DaVinci Interrupt Configuration Changes 7
4.5 Manual Configuration Changes 7
5 Integration DATAFLOW REQUIREMENTS 8
5.1 Required Global Data Inputs 8
5.2 Required Global Data Outputs 8
5.3 Specific Include Path present 8
Abbrevations And Acronyms
| Abbreviation | Description |
| DFD | Design functional diagram |
| MDD | Module design Document |
References
This section lists the title & version of all the documents that are referred for development of this document
| Sr. No. | Title | Version |
| 1 | FDD : SF053A_HwAgVehCentrTrim_Design | See Synergy sub project version |
| 2 | Software Naming Conventions | Process 4.02.00 |
| 3 | Software Design and Coding Standards | Process 4.02.00 |
Dependencies
SWCs
| Module | Required Feature |
| None |
Global Functions(Non RTE) to be provided to Integration Project
None
Configuration REQUIREMeNTS
Build Time Config
| Modules | Notes | |
| None |
Configuration Files to be provided by Integration Project
HwAgVehCentrTrim_Cfg.h is manually created for this component as a temporary solution to a configurable NTC constant (HWAGVEHCENTRTRIM_HWAGVEHCENTRTRIMVLDNTCNR_CNT_ENUM). Currently, this constant is assigned the default EngVal listed in the DataDict.m file but should be configurable in the future.
Da Vinci Parameter Configuration Changes
| Parameter | Notes | SWC |
| None |
DaVinci Interrupt Configuration Changes
| ISR Name | VIM # | Priority Dependency | Notes |
| None |
Manual Configuration Changes
| Constant | Notes | SWC |
| None |
Integration DATAFLOW REQUIREMENTS
Required Global Data Inputs
Refer DataDict.m file in the FDD
Required Global Data Outputs
Refer DataDict.m file file in the FDD
Specific Include Path present
No
Runnable Scheduling
This section specifies the required runnable scheduling.
| Init | Scheduling Requirements | Trigger |
| HwAgVehCentrTrimInit1 | None | RTE (Init) |
| Runnable | Scheduling Requirements | Trigger |
| HwAgVehCentrTrimPer1 | None | RTE (2 ms) |
| ClrHwAgTrimVal_Oper | None | On event |
| GetHwAgTrimVal_Oper | None | On event |
| SetHwAgTrimVal_Oper | None | On event |
| UpdHwAgTrimVal_Oper | None | On event |
Memory Map REQUIREMENTS
Mapping
| Memory Section | Contents | Notes |
| None | ||
* Each …START_SEC… constant is terminated by a …STOP_SEC… constant as specified in the AUTOSAR Memory Mapping requirements.
Usage
| Feature | RAM | ROM |
| None |
Table 1: ARM Cortex R4 Memory Usage
NvM Blocks
| Block Name |
| HwAgTrimData |
Compiler Settings
Preprocessor MACRO
None.
Optimization Settings
None.
Appendix
None