EA4-NTC 0x0E2-LoA Mitigation Threshold Exceeded
LoA Mitigation Threshold Exceeded Overview
NTC 0x0E2
FDD: CF009A
Description:
NTC will be set in CF009A when the Ignition Counter IRV is greater than or equal to a calibration threshold GmOvrlStMgrLoaStIgnCntrThd
Diagnostic Overview:
The NTC 0x0E2 will be set when any one of the following conditions occur:
1..When Ignition Counter IRV is Greater than or equal to a calibration threshold GmOvrlStMgrLoaStIgnCntrThd Signal Available Fault of NTC 0X0E2 is set and NTC is set to FAILED
Typical Fault Response:
- Response for this diagnostic is F1
Probable Sources (Most to Least Probable):
–LOA State is equal to Limited or Software Based Mitigation for Calibratable amount of ignition cycles.
–Repeated Sensor Fault.
Initialization | X |
Periodic | |
Event |
Rev | Revision |
25Sep2015 | Initial Release |
Revision Log