Data Dictionary
Overview
Change LogVariable Dictionary
Calibration Dictionary
Global Constants
Template
Help
Sheet 1: Change Log
| Chrysler Project Orphans - Rev 4 | <- Global Program / Module Name | ||||||
| Revision | Author | Date | Change Description | Data Dictionary Type: | Component | ||
| 1.0 | OT | 1-Mar-12 | Initial Version | ||||
| 3 | LWW | 17-Apr-12 | Removed unused calibrations and added SER defined partnumbers | ||||
| 4 | LWW | 19-Apr-12 | Removed FNOS tool version (app constant, not cal constant) | ||||
| 3.1.1 | SAH | 26-Feb-13 | Removed turns counter cals and added ADC cals | ||||
| 3.1.2 | SAH | 27-Feb-13 | Added appdesc cals for Anomaly 4509 | ||||
| 3.1.3 | SAH | 5-Sep-13 | Cleanup to remove unused cals | ||||
| 3.1.4 | SAH | 15-Oct-13 | Added adc ntc cals used in Iohwab | ||||
Sheet 2: Variable Dictionary
Sheet 3: Calibration Dictionary
Sheet 4: Global Constants
| Chrysler Project Orphans - Rev 4 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Variable Information (Global Variables Only) | Achieved in Software Design | Used in Module List | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Layer 2 | Layer 3 | Layer 4 | Layer 5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Constant Name | Description | Uints | Type | Engineering Value | ADC | ADC Diagnostics | Data Memory Verification | DC Link Power Control | DSP Computational Integrity | DSP SPI driver | Event Manager Driver | External Memory Driver | Flash Programming Exec | GPIO | Illegal OpCode Handler | Interrupt Handler | Motor Current Driver | Motor Driver Diagnostics | Motor Position Driver | Phase Feedback Capture | Powerdown Control | Primary Shutdown Control | Program Flow | Program Memory Diagnostic | PWM Duty Cycle | Redundant Memory Check | Redundant Rapid Shutdown | Scheduler | Stack Monitor | State Dependent Task List | System Boot & Startup | System Control | Temperature Sensor Diagnostic | Unused Interrupt Handler | Utilization Monitor | Watchdog Dirver | Smith | Battery Voltage | Battery Voltage Diagnostics | Diagnostic CTC Manager | Diagnostic Manager | Diagnostics Application Services | EOL TorqueTest | Flash Boot Loader | Flight Recorder | Handwheel Position | Handwheel Torque | Motor Control Output Conversion | Motor Position Diagnostics | Motor Position Initialization | Motor Velocity | Motor Velocity Tachometer | Serial Communications I/O | Serial Communications Services | States and Modes | Tuning Select | Vehicle Power Mode | Vehicle Speed | Controller Polarity | Current Estimation | Handwheel Velocity | Inverse Motor Model | Motor Temperature Estimation | Motor Torque Limit | Output Reasonableness Dianostic | Parameter Estimation | Quadrant and rate Detection | Active Pull Compensation | Assist | Damping | Duty Cycle | Kinematic Integrity Diagnostic | Long Term Vehicle Speed Diagnostic | Max Assist Limit | Return | State Output Control | Torque Output |
Sheet 5: Template
| 2.2a | Data File: | |||||
| Header: | extern <TYPE><TAB><NAME>; | |||||
| Source: | #pragma DATA_SECTION(<ROOTNAME>, "<SEGMENT>"); <TYPE> <NAME>; | |||||
| EOL Constants: | ||||||
| Header: | extern <TYPE><TAB><NAME>; | |||||
| Source: | #pragma DATA_SECTION(<ROOTNAME>, "<SEGMENT>"); <TYPE> <NAME>; | |||||
| Global (Embedded) Constants: | ||||||
| Header: | #define <NAME><COL40><VALUE> | |||||
| A2L Name | ||||||
| Measurement: | rte_<SWC>_<NAME> | |||||
| Calibration Constants: | ||||||
| Tuning ID: | ||||||
| Tuning: | N | Index Range: | ||||
| Header: | extern CONST(<AUTOSAR_TYPE>, CAL_CONST) <NAME>; | |||||
| Source: | #pragma DATA_SECTION(<ROOTNAME>, ".<SEGMENT>"); CONST(<AUTOSAR_TYPE>, CAL_CONST) <NAME> = <VALUE>; | |||||
| eCal: | <NAME> | |||||
| Tuning: | Y | Index Range: | ||||
| Header: | <NONCRITICAL> #define <ROOTNAME><TAB>k_N_CalNC_Cnt_Str.<ROOTNAME> <NONCRITICAL> <SAFETYCRITICAL> #define <ROOTNAME><TAB>k_S_CalSC_Cnt_Str.<ROOTNAME> <SAFETYCRITICAL> | |||||
| Source: | ||||||
| eCal: | <NONCRITICAL> k_N_CalNC_Cnt_Str.<ROOTNAME> <NONCRITICAL> <SAFETYCRITICAL> k_S_CalSC_Cnt_Str.<ROOTNAME> <SAFETYCRITICAL> | |||||
| Tuning: | P | Index Range: | ||||
| Header: | <NONCRITICAL> #define <ROOTNAME><TAB>k_N_CalNC_Cnt_Str.Personality[L3_S_CalPersSelect_Cnt_G_u16].<ROOTNAME> <NONCRITICAL> <SAFETYCRITICAL> #define <ROOTNAME><TAB>k_S_CalSC_Cnt_Str.SC_Personality[L3_S_CalPersSelect_Cnt_G_u16].<ROOTNAME> <SAFETYCRITICAL> | |||||
| Source: | ||||||
| eCal: | <NONCRITICAL> k_N_CalNC_Cnt_Str.Personality[L3_S_CalPersSelect_Cnt_G_u16].<ROOTNAME> <NONCRITICAL> <SAFETYCRITICAL> k_S_CalSC_Cnt_Str.SC_Personality[L3_S_CalPersSelect_Cnt_G_u16].<ROOTNAME> <SAFETYCRITICAL> | |||||
Sheet 6: Help
| Short cut | Macro | Sescription |
| Ctrl-q | ClearDataDictFilter | Will clear all autofilters on the Global Data Dictionary |
| DFD_Create | Creates a Series of Data Flow Worksheet Pages from the information in the data dictionary. If Data Flow Worksheet pages already exist, they will be deleted first. | |
| DFD_Delete | Will clear all Data Flow Diagram pages from the Data Dictionary. This will make the file smaller for archiving. | |
| DFD_Print | Formate and prepares to print the Data Flow Worksheet pages. |